Smeg Tumble Dryer - 9kg Capacity - A++ Energy Efficiency

Heat Pump Technology recycles warm air within the dryer, rather than expelling it. This allows clothes to be dried at lower temperatures, which is gentler on fabrics and significantly reduces energy consumption, leading to lower electricity bills and a smaller environmental footprint.

A 9kg capacity is considered large, suitable for big family loads, duvets, and bulky items. It means you can dry more laundry in fewer cycles, saving time and energy compared to smaller capacity dryers.

An A++ rating is one of the highest energy efficiency classifications. It signifies that your dryer operates with exceptional energy economy, consuming much less electricity than lower-rated models, resulting in significant savings on your utility bills.

Sensor Drying uses sensors inside the drum to continuously monitor the moisture level of your laundry. Once the clothes reach the selected dryness level (e.g., 'cupboard dry' or 'iron dry'), the dryer automatically stops the cycle, preventing over-drying and saving energy.

Yes, the Delay Start feature allows you to program the dryer to start at a later time, typically up to 24 hours. This is ideal for scheduling cycles during off-peak electricity hours, which can be cheaper depending on your energy tariff.

The Hygiene Drying feature utilizes higher temperatures during the drying process to effectively eliminate allergens, bacteria, and dust mites from your laundry, providing a deeper clean and benefiting those with allergies or sensitivities.

For optimal performance and energy efficiency, the lint filter should be cleaned after *every* drying cycle. A clogged filter restricts airflow, increases drying time, and can pose a fire hazard.

Yes, the Anti-Iron Phase works by gently tumbling the drum intermittently after the main drying cycle has finished. This prevents clothes from sitting still and creasing, making them easier to iron or, in some cases, ready to wear directly from the dryer.

Check that the power cord is securely plugged into the wall socket. Ensure the door is fully closed and latched. Verify that the child lock (if activated) is deactivated. Check your home's circuit breaker or fuse box.

Ensure the lint filter is clean before each cycle. Check that the condenser unit (if applicable to your model) is clean. Avoid overloading the drum. Select the appropriate drying programme for the fabric type and desired dryness level. Ensure the ambient room temperature is not too cold, as heat pump dryers perform best in moderate temperatures.

Check that the dryer is placed on a firm, level surface and that all four feet are making contact with the floor. Adjust the leveling feet if necessary. Ensure there are no foreign objects in the drum or caught in the lint filter area. Avoid overloading the machine.

Ensure the water container is correctly inserted and seated. Check for any blockages in the hose or sensor area that detects the water level. Restart the dryer to reset the sensor.