Best current price£23.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£23.49Visit shop B&Q - 45A Dp Oven Cooker Switch & Single 13A Switched Socket Screwless Matt Black
Visit shop3 offers from £23.49
View price history by clicking the chart icon.
The Loops 45A DP Oven Cooker Switch and Single 13A Switched Socket is an ideal choice for homeowners and electricians seeking a minimalist, high-capacity power solution for modern kitchen installations. It offers a sleek, screwless matt black finish that enhances contemporary decor while providing robust double-pole isolation for heavy-duty appliances. However, users should note that the screwless aesthetic requires careful installation to ensure the front plate remains perfectly flush against the wall surface.
| Colour | Black |
|---|---|
| Model Part Number | ue0428 |
| Brand | Loops |
No, this device is not IP-rated for wet zones and should only be used in kitchen or dry living areas.
No, it is compatible with any standard double UK backbox.
The switch is rated for 45A.
Yes, the 13A socket is independent of the 45A oven switch circuit.
The screwless front plate typically clips off by applying gentle pressure to the designated release point, usually found on the underside.
While durable, the matt finish can be scratched by sharp objects; avoid using abrasive scourers.
Check that the backbox is recessed sufficiently into the wall and that no wires are trapped behind the mechanism.
Ensure the device is level and that the mounting screws are not overtightened, which can warp the chassis.
Verify that all cable connections are secure within the terminal blocks and that the supply circuit is active at the consumer unit.
This product is designed for installation into a standard double UK backbox. Because this is a high-voltage electrical device, it must be installed by a qualified electrician in accordance with current IET wiring regulations. Ensure the main power is isolated at the consumer unit before beginning any work.
To maintain the matt black finish, use a soft, dry cloth to remove dust. If the surface becomes marked, use a slightly damp cloth with mild soapy water, then buff dry immediately with a microfiber cloth. Avoid the use of abrasive cleaners or chemical solvents, as these can damage the matte coating and leave permanent streaks.
