M Part Self-adhesive cable guides - Pack of 3
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for cyclists looking to manage their bike cables neatly and efficiently. These self-adhesive cable guides from M:Part offer a simple solution to secure cables to rounded surfaces, improving the bike's appearance and reducing cable clutter. Note that thorough surface cleaning is crucial for optimal adhesion.
All features
| Brand | M Part |
|---|
Extended Product Information
FAQs
How many guides are included in a pack?
A pack of M Part self-adhesive cable guides includes three guides.
What type of surfaces can these guides be applied to?
These guides are designed for rounded surfaces such as bike frame tubes.
Do I need any tools for installation?
No, the guides are self-adhesive and come with cable ties, so no additional tools are required.
Can I remove and reposition the guides?
It is not recommended to remove and reposition the guides, as this may weaken the adhesive. If repositioning is necessary, clean the surface again and consider using a stronger adhesive.
How do I clean the guides?
Use a damp cloth with mild soap and water to clean the guides. Avoid using harsh chemicals or solvents.
What if the cable tie breaks?
You can replace the cable tie with a new one of similar size.
Are these guides suitable for internal cable routing?
No, these guides are designed for external cable routing.
Troubleshooting
Cable guides are not sticking to the frame.
Ensure the frame surface is thoroughly cleaned and dry before application. Consider using a stronger adhesive if necessary. Ensure that the surface is a suitable material.
Cables are still loose after installation.
Tighten the cable tie included with the guide to ensure a secure fit.
Pros and Cons
Pros
- Easy to install with self-adhesive backing.
- Specifically designed for rounded surfaces, ensuring a good fit.
- Improves the look of your bike by organizing cables.
- Includes cable ties for added security.
- Affordable solution for cable management.
Cons
- Adhesion depends on proper surface preparation.
- May not be suitable for all frame materials or finishes.
- Limited to holding a few cables per guide.
- Adhesive may weaken over time or with exposure to the elements.
Setup, Compatibility & Care
- Preparation: Clean the mounting surface thoroughly using isopropyl alcohol or a similar degreaser to remove dirt, oil, and grime. Ensure the surface is completely dry.
- Application: Peel off the backing from the self-adhesive cable guide and carefully apply it to the frame surface where you want to secure the cable.
- Cable Placement: Route your cables through the guide.
- Secure with Cable Tie: Use the included cable tie to secure the cables within the guide, ensuring a snug fit.
- Compatibility: These guides are compatible with most bikes that have external cable routing. They are designed for use on rounded frame tubes.
- Care: Avoid harsh cleaners or solvents when cleaning the bike, as they may damage the adhesive. Check the guides periodically to ensure they remain securely attached.