AB Tools 12N 7 Pin Plastic Plug - Pack of 20

This 7-pin plug supports standard 12N lighting functions, including left and right indicators, brake lights, fog lamp, and side lights.

No, this is a 7-pin plug designed for 7-pin sockets. You would need an adapter if your vehicle has a 13-pin socket and your trailer has a 7-pin plug (or vice versa).

The plug is designed for 7-core cable with a diameter of 7mm to 8mm.

Each wire connects to a screw terminal inside the plug. Ensure you tighten these screws firmly once the wire is inserted to create a secure electrical connection.

ISO1724 is an international standard that specifies the requirements for 7-pin (12N) trailer electrical connectors, ensuring compatibility and performance across different manufacturers and regions.

The product information includes a standard wiring guide showing which function corresponds to each pin number. It is recommended to follow this guide carefully.

Yes, the screw connections inside make it straightforward to disconnect the old wires and connect them to the new plug, provided you follow the correct wiring order.

Check the connection at both the vehicle socket and the trailer plug. Ensure the vehicle's towing electrics are functioning correctly. Verify all wires are correctly connected to the corresponding pins inside the plug and socket.

Inspect the screw terminals for tightness. Loose connections are a common cause of intermittent faults. Check the earth wire (Pin 3) connection at both ends; a poor earth can affect all lights.

Ensure the rubber seal is properly seated and not damaged. Check that the cable outer sheath is securely clamped by the plug's strain relief to prevent water from entering along the cable.

Confirm you are using a 7-core cable with a diameter between 7-8mm. Cables that are too thick will not fit properly.