Best current price£59.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£59.95Visit shop B&Q - Thermilate Pro Flex Interior & Exterior PaintMulti-Surface Paint & PrimerAll-In-OneRock Salt5LMatt
Visit shop2 offers from £59.95
View price history by clicking the chart icon.
Thermilate PRO FLEX Paint is an advanced, all-in-one paint and primer for both interior and exterior use, ideal for professionals and serious DIYers seeking a durable, consistent finish on diverse surfaces. Its key benefit is superior adhesion and flexibility, creating a washable, scrubbable coating. A minor caveat is the need for properly prepared surfaces to ensure optimal performance.
| Colour | Grey |
|---|---|
| Model Part Number | 5056291363749 |
| Brand | Thermilate Technologies |
No, Thermilate PRO FLEX is an all-in-one paint and primer. A separate primer is not required on properly prepared surfaces.
It is suitable for a wide array of interior and exterior surfaces including wood, metal, UPVC, tiles, brick, concrete, plaster, radiators, doors, fences, and furniture.
Once fully cured, the finish is washable and scrubbable. Clean with a damp cloth and mild detergent. Avoid abrasive cleaners.
Yes, its washable and durable nature makes it ideal for surfaces exposed to moisture and regular use, such as kitchen cabinets and bathroom walls/tiles.
Yes, Thermilate PRO FLEX can be applied using a brush, roller, or spray gun.
The paint is quick drying. Specific drying times will vary based on application thickness, temperature, and humidity, but it is designed for minimal disruption.
Yes, it is a low VOC formulation, meaning it has reduced volatile organic compounds.
Ensure the surface was properly cleaned, degreased, and prepared (e.g., sanded if glossy). Check for any residual moisture.
Apply thinner, more even coats. Use a high-quality brush or roller suitable for this type of paint. Ensure paint is not applied too thickly.
Ensure application is within the recommended temperature and humidity range. Thicker coats or poor ventilation can extend drying times.
This can occur in high humidity. Allow for longer drying in a well-ventilated area. Ensure no excess paint was applied.
Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. For previously painted surfaces, ensure they are sound and stable. No separate primer is required on properly prepared surfaces.
Compatibility: PRO FLEX is designed for a wide range of materials including wood, metal, UPVC, tiles, brick, concrete, plaster, and previously painted surfaces. It is not recommended for use on raw, unsealed plaster or porous materials without appropriate pre-treatment.
Application: Apply using a good quality brush, roller, or spray gun. Stir well before use. Apply thin, even coats. Two coats are typically recommended for best coverage and durability. Allow adequate drying time between coats.
Care: Once fully cured, the surface can be cleaned with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh scrubbing that could damage the finish.
