Jeeber 1080P Wifi Video Baby Monitor - 4'' IPS Screen

You can connect up to four Jeeber cameras to a single parent display unit.

The parent display unit and camera will connect directly via a dedicated signal without Wi-Fi. However, remote viewing via the app requires a stable Wi-Fi connection for both the camera and your smartphone.

VOX mode (Voice Operated Exchange) activates the screen and sends app alerts only when sound is detected above a certain threshold, helping to save power and reduce distractions when the baby is quiet.

The direct signal range between the camera and the parent display is optimized for typical home use. For app monitoring, the range is limited only by your internet connection.

Yes, the Jeeber monitor features two-way audio, allowing you to speak to your baby through the parent unit or the app.

Please refer to the product packaging or manufacturer's website for specific warranty information, as it typically varies by region and retailer.

Virtual safety zones can be configured within the Jeeber mobile app menu. You can draw a boundary on the camera's live view, and you will receive a notification if the detected motion enters or leaves this zone.

Ensure both devices are powered on and within range. Try restarting both the camera and the display unit. Check the pairing status in the display's settings menu.

Verify that your Wi-Fi network is active and stable (2.4GHz band). Ensure the camera is within Wi-Fi range. Restart your router and the baby monitor. Check your smartphone's internet connection.

Check for signal interference from other wireless devices. Ensure the camera lens is clean. If using the app, check your smartphone's internet speed. Move the camera and display closer to the Wi-Fi router if possible.

Adjust the motion sensitivity settings in the app or on the display. Utilize the 'Timed motion detection' feature to reduce alerts during specific periods. Consider repositioning the camera to avoid detecting movement from curtains or pets if not intended.

Ensure the camera is not placed directly in sunlight or near a heat source. Allow the monitor to acclimate to the room temperature for at least 15 minutes. The stated accuracy is ±1.5°C.