Best current price£63.69from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£63.69Visit shop Electrical Pneumatic 4 Solenoid Valve 4V21008 Dc 24V Pt14 5 Way 2 Position Manifold Base Muffler Quick Fittings Set 670534173213
Visit shop1 offer from £63.69
View price history by clicking the chart icon.
This Heschen Electrical Pneumatic Solenoid Valve (model 4V210-08 with DC12V coil) is designed for automation control in pneumatic systems, offering reliable directional control for single-acting or double-acting cylinders. Its key benefit is the precise and rapid switching of air flow, enabling efficient operation of automated machinery. A potential caveat is the specific DC12V coil voltage, requiring a compatible power source.
| Model Part Number | 4V210-08-4F220V |
|---|---|
| Brand | Heschen |
The port size for the main air connections (inlet/outlet) is PT1/4.
It uses a solenoid coil that operates on DC12V. Electrical connections are typically made via terminals on the coil itself.
The quick fittings for the inlet/outlet have an inner diameter of 6mm, and the base fittings have an inner diameter of 8mm.
No, this specific model is designed for DC12V and cannot be used with AC power sources without a voltage converter.
While not explicitly stated in the provided information, typical operating pressures for such valves are generally between 1.5 to 8 bar (approx. 22 to 116 PSI). Always consult the manufacturer's full datasheet if available for precise specifications.
The port marked with 'P' or 'IN' is typically the main air inlet. Ports 'A' and 'B' are the work ports connected to the cylinder, and ports 'R'/'EX' or '3'/'5' are the exhaust ports. The internal piloting nature means a supply pressure is needed for actuation, so connect the main compressed air source to the designated inlet port.
The net weight of the valve is 1086g.
Check if the DC12V power supply is correctly connected and providing adequate voltage. Ensure electrical connections to the coil are secure. Verify the air supply pressure is within the valve's operating range for internal piloting.
Ensure the valve is properly sealed against its mounting surface or manifold. Check for debris on sealing surfaces. If leaks persist, the internal seals may be worn, requiring valve replacement.
Confirm the air supply is clean and dry; debris or moisture can impede spool movement. Check tubing connections for leaks. Ensure the operating voltage is stable and correct.
Verify pneumatic connections to the cylinder are correct. Check the cylinder itself for damage or internal issues. Ensure the valve's flow rate is sufficient for the cylinder's requirements.
Setup:
Compatibility:
Care:
