Best current price£60.72from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£60.72Visit shop Finder 12.31.8.230.0000 Daily Mechanical Timer Clock SPDT-CO 16A 2...
Visit shop3 offers from £60.72 - £77.49
View price history by clicking the chart icon.
The Finder 12 Series Daily Timer Switch is designed for electricians and building managers needing reliable automated control of electrical circuits. Its key benefit is precise daily scheduling for lighting, HVAC, or other loads, reducing energy waste and manual intervention. A potential caveat is its analogue interface, which requires physical setting of pins for programming.
| Series | 12 Series |
|---|---|
| Model Part Number | 12.31.8.230.0000 |
| Brand | Finder |
Rotate the main dial clockwise until the indicator arrow points to the current time of day. Ensure the dial moves smoothly.
The minimum time interval for programming ON or OFF periods is 15 minutes.
No, the 12 Series is a daily timer. It can only be programmed for repeating daily schedules. For weekly programming, a different model would be required.
In the event of a power interruption, the internal quartz mechanism will continue to keep time accurately for up to 70 hours, ensuring your programmed schedule remains correct once power is restored.
This timer is rated for AC voltage (250VAC). It is not designed or recommended for use with DC loads.
The number of switching cycles depends on your programming. You can set multiple ON and OFF periods within the 15-minute intervals available throughout the 24-hour cycle.
Verify that the 230VAC power supply is correctly connected and live. Check the circuit breaker or fuse for the connected circuit.
Confirm the current time setting is accurate. Ensure programming pins are fully inserted for ON periods and removed for OFF periods. Check that the load is correctly wired to the CO contact.
Ensure the unit is receiving a stable 230VAC power supply. If power outages are frequent, the 70-hour reserve may not be sufficient for continuous operation. Consider an alternative with battery backup if this is a critical issue.
Do not connect loads exceeding 16A at 250VAC. If a higher load is required, use the time switch to control a contactor or relay rated for the higher load.
Setup:
Compatibility:
Care:
