Best current price£57.61from eBay
Shopping.co.uk recommended and popular offers
eBay£57.61Visit shop US PRO Tools 5pc Ball Joint Separator Set With Quick Change Jaws 6037
Visit shop3 offers from £57.61
View price history by clicking the chart icon.
This guide is for mechanics, DIY enthusiasts, and anyone needing to separate ball joints on vehicles. The US PRO Tools 5pc Ball Joint Separator Set (6037) offers a quick and efficient way to remove ball joints. A key benefit is the quick-change jaw system, allowing for versatility across different vehicle types. However, this set is designed for specific ball joint sizes, so ensure compatibility before use.
| Model Part Number | 6037 |
|---|---|
| Brand | us pro |
The set is designed for universal use, but compatibility varies. Always check jaw sizes against your vehicle's ball joint dimensions and refer to your vehicle's service manual.
Select the jaw size that best fits the ball joint. The jaws should firmly grip the joint without excessive play. Refer to your vehicle's service manual or measure the ball joint if needed.
Loosen the securing mechanism (if present), remove the current jaw, and insert the desired jaw. Secure the quick-change mechanism to lock the new jaw in place.
Apply penetrating oil to the ball joint and let it sit for a while. Use the tool and tighten gradually, avoiding excessive force that could damage the tool or the vehicle. Consider using heat if appropriate and safe.
This set is specifically designed for ball joints, not tie rod ends. Ensure you are using the correct tool for the job.
Store the set in a dry and clean place. After each use, wipe down the tools to remove any grease or debris to prevent rust and maintain performance.
Ensure the correct jaw size is used. Apply penetrating oil to the joint and let it sit before attempting again. Check the tool's screw for proper engagement.
Make sure the tool is correctly positioned and aligned with the ball joint. Tighten the tool gradually and avoid excessive force.
Check for any obstructions or debris preventing the jaw change. Ensure the quick-change mechanism is properly aligned.
