Best current price£44.90from B&Q
Shopping.co.uk recommended and popular offers
B&Q£44.90Visit shop B&Q - Helicoil Thread Repair Kit338-Piece Sae And Metric Rethreading Tool KitM5M6M8M10M121/4"5/16"3/8"
Visit shop2 offers from £44.90
View price history by clicking the chart icon.
The Vevor Helicoil Thread Repair Kit is a comprehensive solution designed for automotive mechanics, DIY enthusiasts, and workshop professionals who need to restore stripped or damaged threads. This 338-piece set provides the versatility of both metric and SAE sizing in a single, organized package, making it an essential tool for engine block repair and general equipment maintenance. While it offers an impressive range of components, the kit requires a steady hand and proper technique to ensure that the newly tapped threads are perfectly aligned with existing fastener holes.
| Model Part Number | XRGY338 |
|---|---|
| Brand | Vevor |
Yes, but you must use appropriate cutting fluid and proceed slowly to avoid overheating and work-hardening the metal.
Yes, the kit includes the necessary high-quality heat-treated drill bits and taps for all featured sizes.
Use the included break-off tool to provide a sharp tap to the tang, which will cause it to snap off cleanly.
Yes, threaded inserts provide excellent holding power, though using thread-locking fluid can add an extra layer of security.
Yes, this kit is specifically designed to support both metric (M5-M12) and SAE (1/4"-1/2") thread standards.
Ensure you are using cutting oil and backing the tap out every half-turn to clear metal chips from the flutes.
Check that the hole was drilled to the correct depth and that the tap reached the full required depth before installation.
Tighten the chuck securely and ensure the bit is properly centered; if the issue persists, verify the bit shank is clean of oil.
Before starting, identify the correct thread pitch and diameter to ensure compatibility with your existing bolts. Proper setup involves drilling the hole squarely; a drill press is preferred, but a steady hand with a handheld drill can work if caution is exercised. After each use, wipe down the taps and drill bits with a clean rag to remove metal shavings and apply a light coating of machine oil to prevent rust. Ensure that all components are placed back into their correct slots in the case, as loose inserts can easily become mixed up if the box is tilted or dropped.
