Ashleigh & Burwood Premium Fragrance Lamp - Pink - Geometric

The duration of fragrance depends on the specific Ashleigh & Burwood Lamp Fragrance used, room size, and how long the lamp is allowed to diffuse. Typically, one fill can last for many hours of diffusion, often several days of intermittent use.

It is generally recommended to use only one fragrance at a time. If you wish to change fragrances, it's best to clean the lamp and wick thoroughly or use a new wick and stone assembly to avoid scent mixing.

Replace the wick and stone assembly when you notice a significant decrease in fragrance diffusion, if the wick appears worn or damaged, or if you are switching to a completely new fragrance and want to avoid any scent transfer.

While the lamp purifies air, it involves an open flame during the heating process and hot components during operation. It should be placed well out of reach of children and used with extreme caution in any environment with young children. Always ensure it is safely extinguished and cooled before leaving the room unattended.

Fragrance lamps use a catalytic combustion process to both purify and perfume the air, involving a heated stone. Oil burners typically use a direct heat source (like a tealight) to evaporate essential oils or fragrance oils, which primarily just scents the air.

Fill the lamp no more than two-thirds full. The exact amount can be adjusted based on desired fragrance intensity, but avoid overfilling to prevent potential leakage or inefficient burning.

No, each lamp is individually handcrafted using fragments of glass. While the style and color palette will be consistent with the 'Fuchsia Fizz' design, minor variations in the placement and combination of glass fragments mean every lamp is unique.

Ensure the wick is fully saturated before lighting. Check that the stone is adequately heated before extinguishing the flame. Verify that you are using the correct Ashleigh & Burwood Lamp Fragrance and that the wick/stone assembly is correctly seated. Allow sufficient time for the catalytic process to begin (usually a few minutes after extinguishing the flame).

Inspect the wick and stone for any signs of wear, cracking, or discoloration. If damage is observed, replace the wick and stone assembly with a new, genuine Ashleigh & Burwood part. Ensure the lamp has cooled completely before attempting replacement.

Adjust the amount of fragrance oil used. For a weaker scent, use less oil or a shorter diffusion time. For a stronger scent, use slightly more oil or allow diffusion for a longer period. Ensure the room is adequately ventilated for optimal performance.

This usually indicates the stone was not hot enough when the flame was blown out, or the snuffer cap was not applied immediately. Ensure the wick burns for the recommended 2-3 minutes to heat the stone properly. Blow out the flame decisively and apply the snuffer cap immediately.