Best current price£18.00from Currys
Shopping.co.uk recommended and popular offers
Currys£18.00Visit shop Polymaker Panchroma 3D Printing Filament - Matte Artic Teal
Visit shop1 offer from £18.00
View price history by clicking the chart icon.
The POLYMAKER Panchroma 3D Printing Filament is an ideal choice for both hobbyists and professionals who prioritize a high-quality matte finish and consistent print performance. It offers exceptional layer adhesion and rapid printing capabilities, making it perfect for complex models where detail and structural integrity are paramount; however, users should be aware that as a PLA-based material, it is not suitable for high-heat environments or mechanical applications requiring significant thermal resistance.
| Model Part Number | CA04006 |
|---|---|
| Brand | POLYMAKER |
Yes, it is designed to work with any FDM printer that supports 1.75mm diameter filament.
While it can print on a cool bed, a heated bed between 25°C and 60°C is highly recommended for better adhesion and to prevent warping.
Store it in a dry, cool environment, ideally in a sealed bag or container with silica gel to prevent moisture absorption.
It is great for non-load-bearing or low-heat functional parts, but it is not intended for high-temperature or high-stress mechanical applications.
The matte finish diffuses light, which makes layer lines less visible and gives prints a more professional, injection-molded appearance.
Increase the bed temperature slightly or apply an adhesive to the build plate to ensure the first layer sticks properly.
Adjust the retraction settings on your slicer and ensure the filament is dry.
Ensure the nozzle temperature is within the recommended 190°C-230°C range and perform a cold pull if the clog persists.
To achieve the best results with Panchroma, set your nozzle temperature between 190°C and 230°C and your build plate between 25°C and 60°C. The filament is compatible with most standard 1.75mm FDM/FFF 3D printers. For optimal care, store the filament in a cool, dry place, preferably in a sealed container with desiccant packets, as PLA is hygroscopic and can absorb moisture from the air over time, leading to stringing or surface blemishes.
