Kenable BNC Plugs RG59 75ohm CCTV Camera Video Cable Lead - 0.25m

This cable is 0.25 meters (approximately 9.8 inches) long.

This is an RG59 75ohm coaxial cable designed for video signals.

BNC plugs are a type of coaxial RF connector with a bayonet-style fitting, commonly used for video and radio frequency equipment.

While BNC connectors can sometimes be used for audio, this specific cable is designed and optimized for analog video signals like those from CCTV cameras.

RG59 cable is generally suited for standard definition analog video. For high-definition digital signals (like HD-SDI or 4K), a different type of coaxial cable (e.g., RG6 or RG11) or a different transmission technology might be more appropriate.

Use a clean, dry, lint-free cloth to gently wipe the metal contacts of the BNC connectors. Avoid using any liquids or abrasive materials.

75ohm refers to the characteristic impedance of the coaxial cable. This is the standard impedance for video signals to ensure minimal signal reflection and loss.

Ensure both BNC connectors are securely twisted and locked onto the camera and DVR/monitor. Verify that the input/output ports are correct and that the camera and display device are powered on. Check if the cable is damaged.

Check for loose connections. Ensure the cable is not routed near strong sources of electrical interference. Inspect the cable for any visible damage. If the distance is long, consider a higher quality cable or an amplifier.

Ensure you are using the correct type of BNC connector. Do not force the connector; check for any obstructions or bent pins. Clean the connector and port if necessary.