Osmo Door Oil - Raw Matt

Use an Osmo Flat Brush or Osmo Microfibre Roller to apply a thin, even coat along the grain of the wood. Ensure good ventilation during application.

Typically, one coat is sufficient. However, for heavily used doors, a second coat may be needed.

No, this product is specifically designed for interior wooden doors.

Drying time is typically 8-10 hours under normal conditions. Ensure good ventilation.

Use a soft, slightly damp cloth to wipe away dirt and spills. Avoid harsh chemicals.

The wood surface must be clean, dry, and free of old finishes. Remove old paints, varnishes, and lacquers.

An Osmo Flat Brush or Osmo Microfibre Roller are recommended for easy and even application.

Reapplication depends on usage and wear. Inspect your doors periodically and reapply when the finish starts to show signs of wear.

Ensure proper ventilation during application. Check the temperature and humidity levels in the room. Make sure the wood is dry before application.

Apply the oil thinly and evenly along the grain. Avoid applying too much oil at once. Use an Osmo Flat Brush or Microfibre Roller for even distribution.

Lightly sand the surface with fine sandpaper before applying the next coat, following the wood grain.