Best current price£16.45from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£16.45Visit shop Tuop Pet Gate Triangle Stabilizer Support, Anti-Kick Fall Prevention Reinforcement Card Slot For 4/5 Inch Fence Barrier Stair Railing, 2Pcs (White)
Visit shop1 offer from £16.45
View price history by clicking the chart icon.
The Pet Gate Triangle Stabilizer Support is designed for pet owners and parents of active toddlers who need extra reinforcement for their safety barriers to prevent shifting or lifting. These stabilizers provide critical support for gate rails exceeding 53 inches, offering peace of mind by keeping structures firmly in place; however, they require a clean, flat surface for the adhesive to bond effectively, which may limit placement options on certain textured floor materials.
| Model Part Number | 6656 |
|---|---|
| Brand | TuoP |
Yes, they can be removed, but the adhesive is designed for a strong bond. You may need to use a hair dryer to soften the adhesive before gently prying it off the floor.
No, these stabilizers are intended for hard, smooth floor surfaces like hardwood, tile, or laminate.
Each package contains two stabilizer supports.
These are designed for indoor use. Outdoor environmental factors like temperature changes and humidity can compromise the adhesive strength.
No, these are intended to reinforce existing pressure-mounted or hardware-mounted gates, not to replace the primary mounting method.
Clean the floor surface thoroughly with isopropyl alcohol to remove grease or residue and re-apply using a new adhesive strip.
Verify that your gate inner card slot is no larger than 4/5 inch; the stabilizer will not fit on wider frames.
Installation is straightforward and requires no tools. Begin by identifying the optimal placement along the bottom rail of your gate. Ensure the gap of your gate frame is within the 4/5 inch specification. Once the position is determined, peel off the protective backing from the adhesive tape on the bottom of the stabilizer. Press the stabilizer firmly against the floor and hold for 30 seconds to initiate the bond. Allow the adhesive to cure for 24 hours before applying any weight or pressure to the gate. For care, simply wipe the stabilizer with a damp cloth; avoid using harsh chemicals that could degrade the adhesive bond over time.
