Best current price£10.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.49Visit shop B&Q - 2Pcs 1425mm (56") Bandsaw Blades 10 Tpi 6.35mm Wide 0.35mm Thick Carbon Spring Steel For Cutting Metal Plastic Wood
Visit shop1 offer from £10.49
View price history by clicking the chart icon.
Designed for hobbyists and woodworkers, these Dapetz bandsaw blades are ideal for those requiring precise, clean cuts in wood, plastics, and soft non-ferrous metals. The 10 TPI configuration offers a reliable balance between cut speed and finish quality, though users should note that these blades are specifically sized for machines requiring a 1425mm blade loop and may not fit standard larger industrial bandsaws.
| Model Part Number | DP00814 |
|---|---|
| Brand | Dapetz |
No, they are specifically designed for bandsaws that require a blade length of exactly 1425mm.
They are suitable for soft non-ferrous metals like aluminum, but they are not intended for cutting hardened steel or thick ferrous metals.
Keep it coiled in a cool, dry place to prevent rusting, ideally in the original packaging or a protective hanging rack.
Replace the blade when you notice the cut quality decreasing, the blade begins to wander, or you find yourself having to force the wood through the machine.
A 10 TPI blade provides a smoother cut but requires a slower feed rate compared to coarser blades like 4 or 6 TPI.
Check your blade tension and ensure the tracking on the wheels is perfectly centered.
Slow your feed rate and check if the blade teeth have accumulated resin; clean with a mild solvent if necessary.
Inspect the weld joint for alignment and verify that no teeth are bent or missing.
Before installation, always disconnect your bandsaw from the power source. Ensure the machine's blade guides and thrust bearings are adjusted to match the 6.35mm width of the blade. Proper tension is critical; consult your bandsaw's manual to achieve the recommended tension for a 1/4 inch wide blade. After every project, clear away resin or debris from the teeth using a soft brass brush. When not in use, if the machine will sit idle for a long period, slightly de-tension the blade to reduce stress on the frame and the blade itself.
