Electric Winch Control Box - WINCHMAX

This WINCHMAX control box is designed for 24V electric winches up to 7.0hp and a pulling capacity of 20,000lbs.

No, this control box is specifically designed for 24V electric winch systems and will not function correctly or safely with a 12V system.

The effective wireless range can vary depending on environmental conditions and potential obstructions, but typically allows operation from a safe distance allowing line-of-sight. Users should maintain a safe distance during operation.

The WINCHMAX Complete kit includes two wireless remote controls.

Ensure the batteries in the remote are fresh. Check for physical obstructions between the remote and the control box. You can use the included wander lead as a reliable wired alternative if wireless performance is compromised.

Yes, the wander lead provides full wired control of the winch functions, mirroring the capabilities of the wireless remotes.

Keep all components clean and dry. Use a slightly damp cloth for cleaning and avoid harsh chemicals. Periodically inspect wiring connections for any signs of wear or corrosion.

Ensure the wireless remote batteries are correctly installed and charged. Check that the remote is paired with the control box. Verify the control box is receiving power from the 24V battery source and that all wiring connections are secure.

The control box is likely receiving power. The issue is likely with the wireless transmission. Re-pair the wireless remotes with the control box. Check for any obstructions or interference between the remote and the control box antenna.

Check all power and motor connections to the control box for looseness or corrosion. Low voltage from the battery can cause erratic operation; check battery charge and connection. Ensure the winch motor itself is not overheating or damaged.

Replace the batteries in the non-working remote. Attempt to re-pair only the non-working remote with the control box. If the issue persists, the remote itself may be faulty.