Best current price£8.55from eBay
Shopping.co.uk recommended and popular offers
eBay£8.55Visit shop Gebildet 24pcs 12mm Latching Push Button Switch
Visit shop4 offers from £8.55 - £12.81
View price history by clicking the chart icon.
1 offer from £7.66
View price history by clicking the chart icon.
This guide is for makers, hobbyists, and DIY enthusiasts looking for reliable momentary push buttons. The key benefit is a pack of 24 versatile buttons in multiple colors for easy project differentiation. A potential caveat is the need for a 12mm mounting hole, limiting placement options without modification. This product offers a durable and precise solution for various electronic projects, featuring a simple press-to-activate, release-to-deactivate function.
| Model Part Number | DE317 |
|---|---|
| Brand | Gebildet |
Momentary means the button only completes the circuit while it is being physically pressed. When you release the button, the circuit is broken. It's like a doorbell button.
The required hole diameter for mounting these buttons is 12mm.
Yes, these buttons are suitable for 12V DC applications as long as the amperage draw does not exceed 3A (at 125V, which is well above 12V DC) and the voltage rating is respected.
A momentary button activates only while pressed. A latching button stays in its activated state (ON) after being pressed and requires another press to return to its original state (OFF).
The package contains 24 momentary push buttons.
These buttons are not rated as waterproof. They are suitable for indoor use or applications where they will not be exposed to significant moisture.
The rated voltage is AC 250V/1.5A and 125V/3A. Ensure your application stays within these limits.
Verify wire connections to both pins. Ensure the circuit being controlled is functional and within the button's voltage/amperage rating. Check if the button is properly seated and the nut is tightened.
This indicates a failure of the momentary mechanism. The button may be damaged or defective and likely needs replacement. Ensure you are using a momentary button and not a latching type.
Ensure the nut and spacer are correctly positioned on the back of the panel. Tighten the nut securely. If the panel material is too thin or soft, consider using a washer or reinforcement.
Check for corrosion on the pins or any debris obstructing the internal contacts. Ensure solder joints or crimp connections are solid. The button itself may be nearing the end of its lifespan.
Setup:
Compatibility:
Care:
