Best current price£8.42from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£8.42Visit shop Wavin Commercial Wavin Tigris Multilayer Composite Press Fit M5 Drl Hep2o Adaptor 16 X 15Mm 4064277
Visit shop
B&Q£10.96Visit shop B&Q - Tigris Multilayer Composite Press Fit M5 Drl Hep2O Adaptor 16 X 15mm 4064277
Visit shop2 offers from £8.42 - £10.96
View price history by clicking the chart icon.
The Wavin Tigris M5 Drl Hep2O Adaptor is designed for professional plumbing installers looking to optimize flow efficiency in multilayer composite pipe systems. It serves as a reliable link between specialized composite pipework and standard 15mm systems, utilizing Opti Flow technology to minimize pressure loss. While it provides superior hydraulic performance, users should note that it requires specific press-fit tooling for a secure and code-compliant connection.
| Model Part Number | 4064277 |
|---|---|
| Brand | Wavin |
It is a design feature in the Tigris M5 range that increases the internal orifice size by up to 50% to reduce pressure loss.
This specific variant is designed for 16mm multilayer composite pipe on one side and a 15mm connection on the other.
Yes, a compatible press tool with the correct profile jaw is required for a secure, leak-proof connection.
Wavin Tigris fittings are typically intended for water and heating systems; always consult local regulations before using in any gas application.
No, press-fit adapters are designed for single-use and should be discarded if not installed correctly.
Verify that the pipe was cut square and the press tool was fully engaged throughout the complete compression cycle.
Check that the pipe end has been properly deburred and calibrated to ensure a smooth transition over the O-ring.
Check the tool manufacturer’s compatibility chart to ensure the press jaw matches the specific Tigris M5 profile.
To install the Wavin Tigris M5 adapter, ensure the pipe is cut square and the end is properly calibrated/deburred before insertion. Use a professional press tool equipped with the correct profile jaws specified by Wavin for the M5 range. Avoid applying heat or lubricants to the fitting during installation, as this can compromise the integrity of the O-ring seal. Post-installation, it is standard practice to pressure test the entire circuit according to local building regulations before concealing pipes behind walls or under floors. Maintain the system by ensuring that the surrounding piping is properly clipped and supported to avoid putting unnecessary mechanical stress on the adapter joint.
