THERMOSTAT HOUSING - D2P - TVAU55561629

This thermostat housing is designed for a range of Chevrolet and Vauxhall vehicles, including the ...

Best current price£18.89from eBay

All Offers

7 offers from £18.89 - £18.96

View price history by clicking the chart icon.

eBayTHERMOSTAT HOUSING FOR VAUXHALL CORSA D E ADAM ASTRA J MERIVA B 55593033 1.2 1.4
Free delivery in 1–3 days
£18.89
Visit shop
OnBuy.comThermostat Coolant For Opel Astra J Corsa D E Chevrolet Cruze 1.2 1.4 55561629 5060414648248
Free delivery in 1–3 days
£18.95
Visit shop

Product Information

Full details

This D2P Thermostat Housing (TVAU55561629) is designed for owners of specific Chevrolet and Vauxhall models, offering a direct replacement for a faulty or worn thermostat housing to restore optimal engine cooling. Its key benefit is ensuring proper engine temperature regulation, preventing overheating and potential engine damage. A caveat is its specific compatibility, requiring verification against your vehicle's make, model, and engine specifications before purchase.

All features

Model Part NumberTVAU55561629
BrandD2P

Extended Product Information

FAQs

How do I know if my thermostat housing needs replacing?

Signs include engine overheating, coolant leaks around the housing area, or erratic temperature gauge readings. A visible crack or damage to the housing also necessitates replacement.

What vehicles is this thermostat housing compatible with?

It is designed for specific Chevrolet and Vauxhall models including Aveo, Cruze, Volt, Corsa D, E, Adam, Astra J, and Meriva B, equipped with the 1.2L petrol engine (LWD, FWD, T300 series) from 2011-2024.

Do I need to replace the thermostat and gasket when I replace the housing?

It is highly recommended to replace the thermostat and gasket (if sold separately) at the same time, as they are often serviced together and are critical components of the cooling system's proper function.

Can I install this myself?

Installation requires draining and refilling the coolant system and careful attention to torque specifications. If you are not experienced with automotive cooling system repairs, it is best to have a qualified mechanic perform the installation.

What is the MPN for this part?

The MPN (Manufacturer Part Number) for this thermostat housing is TVAU55561629.

Are there other part numbers for this housing?

Yes, equivalent part numbers include 55593033, 55561629, 55576890, 55579011, 55593035, 1338029, 1338247, and 1338261.

Troubleshooting

Engine overheating after installation

Ensure the cooling system was properly bled to remove air pockets. Check for any external coolant leaks around the housing and hoses. Verify the thermostat is functioning correctly.

Coolant leaks from the housing

Confirm the housing bolts are torqued to specification. Ensure the mating surface on the engine block is clean and free of debris. Verify the gasket (if applicable and separate) is correctly installed.

No heat from the cabin heater

This could indicate an airlock in the cooling system or a thermostat that is stuck open. Ensure the system is properly bled. If the issue persists, the thermostat itself may be faulty.

Pros and Cons

Pros

  • Ensures proper engine cooling system function.
  • Helps prevent engine overheating and associated damage.
  • Designed for specific Chevrolet and Vauxhall models for a precise fit.
  • Made with durable materials for longevity.

Cons

  • Specific compatibility means it may not fit other vehicle makes or models.
  • Requires installation by a qualified mechanic or experienced DIYer.
  • Does not include thermostat or gasket in some configurations (verify before purchase).

Setup, Compatibility & Care

Compatibility:

This thermostat housing is compatible with petrol models of the Chevrolet Aveo, Cruze, Volt, Corsa D, E, Adam, Astra J, and Meriva B, specifically those with a 1.2 engine (1229cc, 51KW, 69HP, LWD, FWD) in the T300 series, manufactured between 2011 and 2024. Verify part numbers: 55593033, 55561629, 55576890, 55579011, 55593035, 1338029, 1338247, and 1338261.

Setup:

  1. Ensure the engine is cool before beginning.
  2. Drain the engine coolant.
  3. Carefully remove the old thermostat housing.
  4. Clean the mounting surface on the engine block.
  5. Install the new thermostat housing, ensuring the thermostat and any necessary gasket are properly seated.
  6. Tighten bolts to the manufacturer's specified torque.
  7. Refill the cooling system with the correct type of coolant.
  8. Bleed the cooling system to remove air.

Care:

This is a replacement part and requires no specific care beyond ensuring it is correctly installed. Regular checks of your cooling system for leaks or coolant level drops are recommended.

Price History

DatePrice
Visit shop