Best current price£12.99from eBay
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Hycote Spray Paint Double Acrylic Mini Pepper White 150ml + White Primer Kit
Visit shop3 offers from £12.99 - £13.99
View price history by clicking the chart icon.
The Hycote Double Acrylic Mini Spray Paint and Primer Kit in Pepper White is an ideal solution for automotive enthusiasts and DIY hobbyists looking to perform small touch-ups or finish minor bodywork. By combining a 150ml primer and a 150ml Pepper White topcoat in a compact set, it offers professional-grade adhesion and color accuracy while remaining easy to store; however, users should be aware that the 150ml container size is best suited for small repairs rather than full-panel resprays.
| Colour | White |
|---|---|
| Model Part Number | PPGKIT66 |
| Brand | Hycote |
| Container Volume | 150ml |
No, this kit includes a primer and a color-matched Pepper White topcoat. You may need a separate clear coat if a high-gloss protective layer is required.
Yes, provided the surface is properly cleaned and treated with an appropriate plastic adhesion promoter if necessary.
Wait until the primer is touch-dry and matte; typically 15-30 minutes depending on ambient temperature and humidity.
No, this kit is designed for small repairs, touch-ups, or minor trim pieces. It does not contain enough product for a full-panel respray.
When stored in a cool, dry place away from direct sunlight, the product remains effective until the expiry date indicated on the bottom of the can.
Apply thinner coats and increase the distance between the can and the surface.
Remove the nozzle and soak it in thinners, or invert the can and spray until the propellant runs clear after each use.
Ensure the surface was sanded and properly cleaned before primer application; moisture or oils will cause poor adhesion.
Before starting, ensure the target area is completely free of grease, wax, and loose debris using a degreaser. Shake the aerosol cans vigorously for at least two minutes before use to ensure consistent pigment distribution. This kit is compatible with existing OEM factory finishes and can be applied over properly prepared acrylic or cellulosic surfaces. Always test the spray on a piece of scrap cardboard first to check the fan pattern and color match. To maintain the nozzle for future use, invert the can after application and spray for 2-3 seconds to clear the valve of residual paint.
