Best current price£15.21from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.21Visit shop B&Q - Electrical Uk Domestic Household Light 1 Way Single Light Switch White (10 Pack)
Visit shop3 offers from £15.21
View price history by clicking the chart icon.
This guide is for homeowners, electricians, and landlords looking for reliable, standard 1-way light switches. The key benefit is simple, straightforward on/off control for single-location lighting, ensuring compliance with British Standards. A potential caveat is its single-pole nature, meaning it cannot be used for multi-way switching configurations. This pack provides ten white, single-gang 1-way switches, rated at 10 amps, suitable for most domestic lighting circuits and designed for easy installation.
| Colour | White |
|---|---|
| Model Part Number | 012969 |
| Brand | kenable |
A '1 Way' switch means it controls a light fixture from a single location only. It has two terminals (Live and Switched Live) and provides a simple on/off function.
No, this is a 1-way switch and is only designed for single-location control. For control from two locations, you would need a 2-way switching system.
The switch is rated for a maximum load of 10 amps. This is sufficient for most standard domestic lighting circuits.
This switch is designed to fit standard UK single-gang back boxes, so often you can reuse your existing back box if it is in good condition.
No, this switch is designed for domestic indoor use only and does not have an IP rating for protection against dust or water.
The 10-amp rating is suitable for most common domestic bulbs, including LED, halogen, and incandescent fittings, provided the total load does not exceed 10 amps.
The product conforms to BS EN 60669, ensuring it meets the latest British electrical safety standards and regulations.
Ensure the circuit breaker for the relevant circuit is switched on. If the problem persists, consult a qualified electrician to check wiring connections and the switch's internal functionality.
This could indicate a loose connection or that the load is near the 10-amp limit. A qualified electrician should inspect the wiring and ensure the switch is appropriate for the connected load.
Check that the fixing screws securing the switch to the back box are tightened appropriately. Do not overtighten, as this could damage the back box or switch.
Setup:
Installation of this light switch should always be carried out by a qualified electrician to ensure safety and compliance with electrical regulations. The switch is designed to fit standard UK single-gang back boxes. Ensure the power supply is completely isolated before attempting any wiring.
Compatibility:
Care:
