Setup, Compatibility & Care
Setup:
- Ensure surfaces are clean, dry, and free from dust, grease, and loose material.
- Puncture the tube seal using the cap or a suitable tool.
- Apply the adhesive in a zig-zag pattern to one surface, or in dabs for heavier items.
- Position the items immediately and press firmly. For heavier items, temporary support may be needed until the adhesive cures.
- Allow approximately 24 hours for full cure. Avoid disturbing the bonded items during this period.
Compatibility:
Suitable for most common building materials including: mirror, wood, ceramic, tiles, cork, steel, stone, plaster, concrete, brick, glass, and most plastics. Test on a small, inconspicuous area first if unsure, especially with plastics.
Care:
Store tubes in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is securely fastened after use to prevent the adhesive from drying out.