Token Ninja Thread Fit Bottom Bracket - Grey

Yes, the Token Ninja is specifically designed to fit into BB30 shells while allowing you to run various crankset standards.

Yes, the unit is compatible with 24-22mm SRAM GXP cranksets.

Yes, you will need a compatible bottom bracket socket tool to engage the external splines on the Ninja cups.

Service intervals depend on riding conditions. In dry weather, an annual inspection is sufficient, while riders in muddy or wet conditions should inspect them every few months.

Absolutely. The durable construction and enhanced sealing make it well-suited for the rigors of mountain biking.

Yes, the Ninja threads into itself, effectively converting your frame to a thread-together system which is much more stable than standard press-fit.

Ensure the two threaded halves are fully tightened against one another. If the sound persists, remove, clean the frame shell interfaces, apply fresh grease, and reinstall.

Check that the correct spacers are being used for your specific crankset width. Overtightening of the bottom bracket cups can also lead to increased friction.

Verify that all spacers are installed correctly as per the crankset manufacturer's instructions. Tighten the crank arm preload adjustment if applicable.