Best current price£22.95from eBay
Shopping.co.uk recommended and popular offers
eBay£22.95Visit shop Varilight JDSP401S Screwless Brushed Steel 1 Gang 2 Way LED Dimmer 0-120W V-Pro
Visit shop
The Range£27.15Visit shop Varilight Jdsp401s Leading & Trailing Edge 1-Gang Brushed Steel, 86X86x48mm - Brushed Steel
Visit shop4 offers from £22.95 - £29.64
View price history by clicking the chart icon.
The Varilight V-Pro Universal Dimmer Switch (JDSP401S) is an ideal choice for homeowners and electrical contractors seeking a versatile, high-end dimming solution for modern LED and traditional lighting. It excels in delivering smooth, flicker-free dimming across various bulb types including GU10 LEDs, CFLs, and halogens, though users should be mindful that it requires proper load matching to ensure full compatibility with specific LED driver circuits.
| Colour | Grey |
|---|---|
| Model Part Number | JDSP401S |
| Brand | Varilight |
No, non-dimmable bulbs will flicker, hum, or fail prematurely when used with any dimmer switch.
The JDSP401S is a 1-gang switch designed to control one circuit of lights.
Yes, this model supports 2-way operation when paired with an appropriate secondary switch.
Please consult the technical data sheet included in the packaging for specific wattage limits based on the bulb type being used.
Use a soft, dry cloth. Do not use chemical sprays or abrasive cleaners that could scratch the surface.
Varilight V-Pro dimmers are typically designed for 2-wire installation, but please confirm with your electrician upon inspection of your wall box.
Check that the bulbs are rated as dimmable and ensure the total wattage is within the switch capacity.
Verify that all wiring is correctly seated in the terminals and check the circuit breaker for any tripped switches.
This is often caused by an incompatible LED driver or exceeding the maximum recommended load for the dimmer.
Installation should always be performed by a qualified electrician to ensure compliance with local building regulations. Ensure that your wall box is of the correct depth to accommodate the dimmer module. Before installation, confirm that all bulbs connected to the circuit are marked as 'dimmable.' To care for the brushed steel finish, avoid using abrasive chemical cleaners. Instead, wipe the surface gently with a dry, soft microfibre cloth to remove dust or fingerprints. Periodically inspect the knob for firm seating and ensure the electrical connections remain tight during routine maintenance.
