Safeguard Dryzone Anti-Mould Paint Additive - 100ml - White
Adds mould resistance to paints, wallpaper pastes and grouts. Compatible with all types of paint (...Adds mould resistance to paints, wallpaper pastes and grouts. Compatible with all types of paint (emulsion, vinyl, silk or matt). Lasts for up to 5 years, preventing the recurrence of black mould. Compatible with all known paint finishes. Easy to use and cost effective. Ideal for walls and ceilings in private and social housing and a wide range of public and commercial buildings.
Dryzone Anti-Mould Additive 100ml Concentrate to 100 ml (Pack of 1), ClearFree delivery in 1–3 days£15.59Visit shop →
Product Information
Full details
This guide helps users effectively utilize the Dryzone Anti-Mould Paint Additive. Designed for homeowners and professionals, this additive prevents black mould from recurring for up to 5 years when mixed with paint, wallpaper pastes, or grouts. Note that proper surface preparation and ventilation are crucial for optimal results.
All features
Colour
White
Brand
Dryzone
Extended Product Information
FAQs
How long does the mould protection last?
The Dryzone Anti-Mould Paint Additive provides up to 5 years of protection against mould recurrence.
Can I use this additive with any type of paint?
Yes, it is compatible with all types of paint, including emulsion, vinyl, silk, and matt finishes.
Is it safe to use?
Follow the safety instructions on the product packaging. Ensure good ventilation when applying the product.
Do I need to remove existing mould before using this additive?
Yes, remove existing mould and treat the area with a mould remover before applying the additive.
Can I use this in wallpaper paste?
Yes, the additive can be mixed with wallpaper paste to prevent mould growth behind wallpaper.
Where can I use this product?
Ideal for walls and ceilings in private and social housing, and a wide range of public and commercial buildings, especially in areas with high humidity or moisture.
How much additive should I use?
Refer to the product label for the correct mixing ratio for your specific application (paint, paste, or grout).
Troubleshooting
Mould reappears after application.
Ensure the surface was properly prepared (cleaned and existing mould removed) and that the additive was mixed correctly. Check for inadequate ventilation and address any sources of moisture.
Paint or paste consistency changes after adding the additive.
Ensure you are using the correct ratio of additive to product. If the consistency is too thick, try thinning it slightly with water (for paint) or as directed by the product manufacturer.
Pros and Cons
Pros
Prevents mould for up to 5 years.
Compatible with a wide range of paint types and finishes.
Easy to incorporate into existing painting or decorating projects.
Suitable for various environments, including private and public buildings.
Cons
Requires proper surface preparation for optimal performance.
Effectiveness depends on adequate ventilation.
Not a standalone solution; requires mixing with paint, paste, or grout.
May not eliminate existing severe mould infestations; requires prior treatment.
Setup, Compatibility & Care
Preparation: Ensure the surface is clean, dry, and free from loose paint or wallpaper. Remove any existing mould and treat the area with a mould remover before application. This additive is not a replacement for mould removal.
Mixing: Add the Dryzone Anti-Mould Paint Additive to your paint, wallpaper paste, or grout according to the manufacturer's instructions on the packaging. Stir thoroughly to ensure even distribution.
Application: Apply the paint, paste, or grout as you normally would. Follow the manufacturer's instructions for the chosen product.
Compatibility: This additive is compatible with all known paint finishes (emulsion, vinyl, silk, matt). It is also compatible with wallpaper pastes and grouts.
Care: Ensure proper ventilation during and after application. Clean up spills immediately. Store the product in a cool, dry place and keep out of reach of children.