Best current price£4.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£4.00Visit shop (45Cm, 1M) Sonoma Oak Light Sticky Back Plastic Vinyl Wrap Film 5056525303190
Visit shop
B&Q£10.97Visit shop B&Q - Sonoma Oak Light 45Cm X 1M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £4.00 - £10.97
View price history by clicking the chart icon.
This D-C-Fix Woodgrain Vinyl Wrap Film in Sonoma Oak Light is for DIY enthusiasts and renters looking to quickly and affordably update surfaces like worktops, kitchen doors, furniture, and wardrobe fronts. Its key benefit is its authentic woodgrain appearance and ease of application, allowing for significant aesthetic upgrades without the cost of replacement. A primary caveat is that while removable, care must be taken to avoid damaging the underlying surface, especially on delicate materials.
| Model Part Number | 200-3218-1 |
|---|---|
| Brand | d-c-fix |
This D-C-Fix vinyl is designed for interior applications. While it has good lightfastness, prolonged exposure to outdoor elements like UV rays and moisture can degrade the adhesive and material.
It is not recommended to apply directly over wallpaper, especially if it is peeling or textured. For best results, apply to smooth, clean, and sealed surfaces. If applying over wallpaper, ensure it is firmly adhered and very smooth, though results may vary.
The water-based low-tack adhesive is designed for reliable adhesion on suitable surfaces for the lifetime of the film under normal interior conditions. It allows for repositioning during application for ease of use.
Product dimensions typically vary by specific roll. Please check the product packaging or listing for the exact width and length of the roll you are purchasing.
While the vinyl itself is water-resistant, it is best suited for surfaces that do not experience constant moisture. Ensure edges are sealed properly if used in a high-moisture area like a bathroom to prevent water from seeping underneath.
When removed carefully using heat (like a hairdryer) to soften the adhesive, it should not cause significant damage to most well-maintained, sealed surfaces. However, on delicate surfaces or if removed too quickly, there is a risk of residue or minor surface damage.
Gently lift the vinyl edge with a pin to release the trapped air and smooth it down again. For larger bubbles, try warming the area slightly with a hairdryer on a low setting and then smoothing.
Ensure the surface is thoroughly cleaned and dried. Reapply heat with a hairdryer to activate the adhesive, then press firmly.
Use a hairdryer on a medium heat setting to warm the vinyl. This softens the adhesive, making it easier to peel back slowly at a low angle. Be patient and steady.
Warm the residue with a hairdryer, then gently scrape it off with a plastic scraper. Alternatively, use warm soapy water and a soft cloth to wipe away any remaining stickiness.
Setup:
Compatibility:
Care:
