Chemical Guys Hybrid V7 High Gloss Spray Sealant - 16oz

Yes, Hybrid V7 can be used on ceramic coated surfaces as a maintenance spray to enhance gloss and provide a slick feel. However, it is not a replacement for the ceramic coating itself.

The protection is a spray sealant and typically lasts several weeks, depending on environmental conditions and washing frequency. For longer-lasting protection, consider a dedicated spray sealant or ceramic coating.

Hybrid V7 is a hybrid product; it acts as a quick detailer to remove light dust and smudges while also providing a layer of spray sealant protection and a high-gloss finish.

Yes, it can be layered. It's often used as a drying aid after washing or as a topper for existing wax or sealant layers to boost gloss and slickness.

The easiest method is to mist lightly onto a clean microfiber towel, wipe onto a small section of the vehicle, and then buff off immediately with a separate clean, dry microfiber towel. You can also mist directly onto the surface, but be mindful not to use too much product.

No, Hybrid V7 is designed for light cleaning and enhancing gloss. It will not remove deep scratches, swirl marks, or heavy paint imperfections. For those issues, a polishing compound or paint correction is necessary.

It refers to the product's ability to create a clear, distortion-free shine that enhances the true color and depth of the paintwork, reflecting light cleanly without cloudiness.

This can occur if the product was applied too thickly, not buffed off thoroughly, or if the microfiber towels were dirty. Ensure you are using clean microfiber towels, working in small sections, and buffing off all residue completely. Try a final buff with a separate, dry microfiber towel.

Ensure the surface was clean and properly prepped before application. If the surface has heavy contamination or oxidation, Hybrid V7 may not provide the desired dramatic shine; a more intensive polishing step might be needed first. Reapply a second thin coat and buff carefully.

While designed for various surfaces, some plastics can be sensitive. Apply sparingly to trim or mask it off if concerned. If residue appears, try buffing it off with a damp microfiber cloth, followed by a dry one. Avoid applying directly to heavily textured or porous plastics if issues arise.