electriQ External Ducting Kit - eiQEDKINDD

The kit includes an external wall vent, a 2m extension pipe, a corner piece attachment, fixing screws and plugs, and two metal clamps.

The extension pipe is 150mm wide.

No, this kit is designed for external extraction only. For recirculating mode, refer to the eiQIDKINDD kit.

You will need basic tools like a screwdriver and possibly a drill for mounting the external vent.

The external vent should be placed on an exterior wall, ensuring it's in a location where the exhausted air will not be drawn back into the building.

This kit includes a 2m pipe. If you need a longer run, you may need to purchase additional extension pipes.

Inspect and clean the external vent periodically to remove any build-up or obstructions, typically every few months depending on usage.

While the kit is designed for DIY installation, professional installation is recommended if you are not comfortable with the process or if your installation requires significant modifications.

Check for any kinks or blockages in the ducting. Ensure the external vent is not obstructed. Verify all connections are airtight.

Ensure you have adequate space behind the hob and within the cabinet. Consider the routing path and if a corner piece is needed.

Ensure the external wall opening is the correct size. Use appropriate sealant around the vent for a weather-tight fit.

Tighten the metal clamps to secure the ducting connections. Ensure the ducting is fully inserted into the connectors.