Gul Contour Full Length 3.2mm Wetsuit - Black

The Gul Contour Full Length Wetsuit is made from durable polyester.

The 3.2mm thickness is generally suitable for moderate water temperatures, typically above 15°C (60°F). For colder conditions, additional thermal layers or a thicker wetsuit may be necessary.

Refer to the Gul sizing chart for accurate measurements. The wetsuit should be snug all over without restricting your breathing or movement.

No, never machine wash your wetsuit. Always rinse with fresh water after use and hand wash only if necessary with a mild soap.

The 3.2mm thickness provides moderate insulation. For very cold water, it is recommended to use a thicker wetsuit or wear thermal layers underneath.

It is ideal for a range of watersports including surfing, kayaking, paddleboarding, and general recreational water activities in temperate climates.

Store your wetsuit loosely folded or hung on a wide, padded hanger in a cool, dry place away from direct sunlight to prevent creasing and material degradation.

Ensure you have selected the correct size according to the brand's sizing chart. A proper fit should be snug but allow for movement. If it's genuinely too small, consider exchanging for a larger size.

The 3.2mm thickness is best suited for moderate water temperatures. For colder conditions, consider adding a thermal rash vest underneath or opting for a thicker wetsuit (e.g., 5mm).

This can occur if the wetsuit was not rinsed properly or dried in direct sunlight. Always rinse with fresh water and dry in the shade. A specific wetsuit conditioner can sometimes help restore flexibility.

Ensure the fabric is not caught in the zipper. A slight twist of the wrist may help engage the zipper. If the zipper is stiff, a small amount of wax or silicone lubricant applied to the teeth can improve function.