Best current price£33.42from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£33.42Visit shop Katsu Hvlp Paint Spray Gun Gravity Feed 600Cc With 4 Copper Nozzles 1.4/1.7/2.0/2.5Mm, Air Regulator With Pressure Gauge And Air Fliter, Pneumatic Air 5056156058346
Visit shop1 offer from £33.42
View price history by clicking the chart icon.
The KATSU Tools Gravity Feed Paint Spray Gun is designed for professionals and DIY enthusiasts seeking efficient and versatile paint application. Its key benefit is the provision of adjustable controls and multiple nozzle sizes, allowing for precise finishes on various surfaces. A minor consideration is the need for a compatible air compressor and proper setup for optimal performance.
| Model Part Number | 221427 |
|---|---|
| Brand | KATSU Tools |
The recommended delivery pressure is between 2.0 and 3.0 Bar.
Smaller nozzles (1.4mm) are best for thin materials like primers and lacquers, while larger nozzles (1.7mm, 2.0mm, 2.5mm) are suitable for thicker materials like automotive paints and varnishes.
Yes, this spray gun is suitable for use with both solvent-based and water-based paints.
The gun must be cleaned thoroughly after each use. Disassemble and clean the fluid needle, nozzle, and air cap with appropriate solvents. Clean the mesh filter and ensure all parts are dry before reassembly.
The spray gun comes with multiple nozzles, a cup, air regulator, gauge, filter, and connectors. However, you will need an air compressor, paint, and personal protective equipment.
The optimal spraying distance is between 15 - 24cm from the surface.
Check for clogged nozzle or air cap. Ensure correct air pressure is set. Verify adequate paint flow by adjusting the fluid control knob.
Reduce paint viscosity by thinning. Increase air pressure slightly. Decrease spraying distance or increase fan width.
Ensure the fluid needle is not obstructed. Check that the cup is properly seated and the pickup tube is submerged. Verify the fluid control knob is open.
Check all connections for tightness. Inspect seals and O-rings for damage and replace if necessary. Ensure the cup is sealed properly.
Setup:
Compatibility:
Requires an air compressor capable of delivering sufficient airflow and pressure. The 1/4" BSP air inlet is standard and compatible with most air hoses and fittings, especially with the included UK and European quick connectors. Suitable for use with solvent-based and water-based paints, lacquers, and varnishes.
Care:
Clean the spray gun immediately after each use to prevent paint from drying and clogging the internal parts. Disassemble the fluid needle, nozzle, and air cap for thorough cleaning with a suitable solvent. Use the provided wrench for disassembly. The mesh filter should also be cleaned regularly. Store in a dry place.
