Best current price£120.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£120.00Visit shop B&Q - Antique Brass T Shape 3.6M Handrail KitLoxleyCuts To Size5Yr Guarantee
Visit shop2 offers from £120.00
View price history by clicking the chart icon.
The Handrails Direct Loxley T Shape Handrail Kit is an ideal solution for homeowners and DIY enthusiasts renovating split staircases that feature a central landing. This system provides a sophisticated bronze finish that complements traditional interior aesthetics while offering a continuous, sturdy support structure. While the kit is specifically engineered for a 2800 mm floor-to-floor height and includes essential components like adjustable elbows for directional changes, users should ensure their stair geometry aligns with these specifications before installation to guarantee a proper fit.
| Colour | Bronze |
|---|---|
| Brand | Handrails Direct |
This kit is specifically designed for a 2800 mm floor-to-floor height; using it outside of this range may require custom modifications not covered by the kit.
Yes, the system is fully compatible with the broader 40mm Loxley handrail component range, allowing for modular additions.
You will typically need a drill, level, measuring tape, and a screwdriver or impact driver for mounting the wall brackets.
The finish is designed for traditional interior environments. It is not recommended for outdoor use where it may be exposed to moisture or extreme UV.
While the tubes are 1.2 metres, if you need a shorter run, the metal can be cut with appropriate metal-cutting tools, though this should be done carefully to ensure a clean finish.
Verify that all wall brackets are tightened securely into wall studs or appropriate anchors and that the rail tubes are fully seated in the connectors.
Loosen the adjustment screw on the elbow connector to re-orient the angle, then firmly tighten once the desired trajectory is achieved.
Clean the handrail with a soft, microfiber cloth to remove fingerprints and oils; ensure no harsh cleaning agents were used.
To install this kit, ensure your floor-to-floor height is approximately 2800 mm. Begin by marking your wall bracket locations to ensure the rail height remains consistent through the landing. Use the included wall brackets to secure the 1.2-metre tubes, utilizing the adjustable elbows to bridge the corner turns of your T-shape layout. For maintenance, clean the bronze surface periodically with a soft, dry cloth to prevent dust buildup. Avoid abrasive chemical cleaners, which may degrade the bronze finish over time. Periodically check that all bracket screws remain tight, especially during the first few months after installation.
