Domus 6902W Cowled Vent Grille - 150mm / 6 Inch Duct - White

This grille is designed for 150mm or 6-inch diameter ducting.

While it can technically allow air in, its primary design is for air exhaust. The cowl design is optimized for outward airflow and weather protection.

The Domus 6902W is a gravity-operated grille, meaning it relies on airflow direction. It does not typically include an active backdraft damper, but the cowl design helps mitigate some backflow.

You can clean the grille with a damp cloth and mild soap. Ensure it is dry before reassembly or before airflow is re-established. Periodically check for and remove debris.

The external dimensions are approximately 202mm wide x 202mm tall x 140mm deep.

The cowled design offers good protection, but in extremely high wind areas, proper secure mounting is essential. Consider consulting a ventilation professional if you have specific concerns.

The grille is white.

Visually inspect the cowl and grille for debris, leaves, or bird nests. Carefully remove any obstructions by hand or with a soft brush.

Check the connected ducting for kinks or blockages. Ensure the grille itself is clean and free from dust buildup. Clean the grille with a damp cloth.

Ensure the grille is securely fixed to the wall and the ducting is properly connected. Vibration can cause noise; check for loose fittings.

While designed to minimize water entry, extreme weather can sometimes cause minor ingress. Ensure the cowl is angled correctly and there are no obstructions around the exterior.