20L Heavy Duty Jerry Cans - UN Certified Portable Fuel Container - Pack of 4

UN certification means the Jerry Can has passed rigorous testing by the United Nations to ensure it meets safety standards for the transport of dangerous goods, including flammable liquids. The specific certification number (3A1/Y 1.2/100.13 IND/125836580) indicates its type, performance level, and manufacturer.

These cans are specifically designed and certified for flammable liquids such as petrol, diesel, and kerosene. They are not recommended for water, food, or other non-flammable liquids, as residual fuel could contaminate them, or the can's interior may not be suitable.

Store full Jerry Cans upright in a cool, dry, well-ventilated area away from heat, sparks, open flames, and direct sunlight. Ensure the cap is tightly sealed. Avoid storing in living spaces or enclosed areas without adequate ventilation.

After emptying, rinse the inside with a small amount of the same type of fuel it contained. Swish thoroughly and empty completely. Avoid using water, as it can lead to internal rust. Allow to air dry in a safe, well-ventilated location before resealing.

Please refer to the retailer's specific warranty information. Typically, manufacturers offer a limited warranty against defects in materials and workmanship.

While steel is robust, it can rust if exposed to moisture over time. Proper cleaning and drying after each use, along with storing in a dry environment, will help prevent rust. For long-term storage, consider using a fuel stabilizer or a compatible rust inhibitor.

Yes, the exterior can be painted. Ensure the surface is clean and dry before applying a metal-appropriate paint. This can also offer an additional layer of protection against external corrosion.

Ensure threads are clean and free of debris. If sticky, a small amount of petroleum jelly on the threads (away from the seal) may help, but avoid over-application.

This is normal for new steel containers. Air out the can in a well-ventilated area away from ignition sources for a few days.

Light rust can be cleaned with a steel wool pad and then protected with a suitable metal paint or lubricant. If rust is extensive internally, the can may need replacement.

Ensure the cap is fully tightened. Check the rubber seal on the cap for wear or damage; replace if necessary. Transport the can in a secure, upright position.