Setup, Compatibility & Care
Before installing, verify that your computer case supports a 360mm radiator, typically found at the front or top mounting points of mid-to-full tower cases. Ensure you have a clear path for the tubing so it is not pinched or pulled tightly. For power, connect the pump to a designated AIO_PUMP or high-amp fan header on your motherboard to ensure it receives consistent 12V voltage. The fans utilize a standard 4-pin PWM connector, which should be connected to the CPU_FAN header or a dedicated fan controller. Periodically, use compressed air to gently remove dust buildup from the radiator fins, as accumulation can significantly reduce the cooler's efficiency. Ensure the display cable is securely connected to an internal USB header on your motherboard to enable the software interface.