Setup, Compatibility & Care
Before starting, ensure the target surface is dry, free from wax, grease, and loose rust. If repairing metal, lightly sand the area to provide a 'key' for the primer to grip. Shake both cans vigorously for at least two minutes before use. Apply the primer in light coats, holding the nozzle 15-25cm away from the surface. Once the primer is dry to the touch, follow with the VW Candy White topcoat, applying several thin coats instead of one thick one. For maintenance of the cans, clear the nozzle after each use by turning the can upside down and spraying for a few seconds until only propellant comes out, which prevents the tip from clogging.