Fully Threaded Rod 1M (1000mm) Stud Bolts - M6 (Pitch: 1.0) - Pack Of: 5 - SS8
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The SS8 Fully Threaded Rod 1M (1000mm) is designed for contractors, engineers, and DIY enthusiasts who require high-strength, adjustable fastening solutions for heavy-duty construction and industrial frameworks. Its primary benefit is the continuous threading that allows for precise customization and maximum grip when paired with standard nuts and bolts, though users should note that the rod requires manual cutting if shorter lengths are needed for specific installations.
All features
| Brand | SS8 |
|---|
Extended Product Information
FAQs
Can I cut this rod with a standard hacksaw?
Yes, a standard hacksaw with a metal-cutting blade is effective for cutting through this M6 rod.
What is the thread pitch of this rod?
This rod features a standard M6 thread with a 1.0 pitch.
Does this pack include nuts and washers?
No, this product is for the rods only. You will need to source standard M6 nuts and washers separately.
Can I weld these rods?
Yes, the material is suitable for welding in structural applications, provided you use the appropriate welding technique for the alloy.
Is the rod stainless steel or zinc-plated?
These rods are designed for general high-strength industrial use. Check your specific local supplier packaging for material finish details.
Troubleshooting
Nut does not thread onto the cut end
The cut may have created metal burrs. Use a metal file to smooth the edge of the thread or try threading from the factory-cut end.
Rod vibrates loose under machine operation
Use a secondary jam nut or thread-locking compound to secure the connection against vibration.
Pros and Cons
Pros
- Maximum adjustability due to full-length threading
- Highly durable for demanding industrial use
- Standardized M6 threading ensures wide compatibility
- Easy to customize by cutting to specific lengths
Cons
- Requires manual effort for cutting to custom sizes
- Edges may require deburring after cutting
- Limited to M6 size and standard pitch
Setup, Compatibility & Care
To install, simply measure the required length and mark the rod clearly. Use a hacksaw with a fine-tooth blade or an angle grinder with a metal-cutting disc to make your cut. It is essential to file down any burrs on the cut end to ensure the nuts can be threaded on smoothly. For maximum longevity, keep the rods in a dry environment to prevent surface corrosion. If used in outdoor or high-moisture settings, consider applying a light coat of anti-seize lubricant or a protective spray to the threads.