Best current price£15.19from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.19Visit shop - 2X 8mm Hook & Eye Straining Screw Turnbuckle Galvanised Steel Wire Rope Tension
Visit shop3 offers from £15.19 - £15.99
View price history by clicking the chart icon.
This guide is for anyone needing to safely and precisely tension wire ropes, particularly in outdoor applications. The Loops 8mm Hook & Eye Straining Screw Turnbuckle offers a robust solution for tightening wire ropes, ensuring safety and proper installation. A key consideration is that it's designed for specific wire rope diameters, so ensuring compatibility is essential for effective use.
| Colour | Silver |
|---|---|
| Brand | Loops |
This turnbuckle is designed for wire ropes up to 8mm in diameter.
Yes, for a complete and secure installation, you will typically need wire rope thimbles to protect the wire loop and wire rope grips to secure the wire. Anchor points like eye bolts or hooks are also necessary.
While galvanised steel offers good corrosion resistance, prolonged exposure to harsh marine environments may eventually lead to corrosion. For extreme marine use, stainless steel alternatives might be more suitable.
Correct tension depends on the application. Generally, the wire should be taut enough not to sag significantly under its own weight or load, but not so tight that it overstresses the anchor points or the wire itself. Visual inspection and application-specific guidelines are key.
This product is intended for tensioning and general use, not for lifting heavy loads. Always refer to the product's specifications and intended use; never use it for overhead lifting unless specifically rated and designed for it.
Galvanised steel is steel that has been coated with a layer of zinc during the manufacturing process. This zinc coating acts as a protective barrier, providing resistance against corrosion and rust, especially in outdoor or wet conditions.
Ensure the wire rope is correctly seated and that no debris is obstructing the screw threads. Check that the wire rope diameter does not exceed the 8mm limit.
Verify that wire rope grips are securely fastened. Ensure the turnbuckle is fully engaged and that the wire rope itself is not stretching excessively.
Clean the affected area with a stiff brush. For minor rust, a light application of a rust inhibitor suitable for galvanised surfaces may help. Inspect for deeper damage; if structural integrity is compromised, replace the unit.
Ensure the connecting hardware (e.g., carabiner, eye bolt) is properly secured. Check that the hook or eye itself is not deformed or damaged.
Setup: To install, thread the wire rope through the hook or eye end (depending on your setup). Use wire rope grips and a thimble (sold separately) to secure the wire loop. Attach the free end of the turnbuckle to your anchor point (e.g., a plate hook or eye bolt). Once secured, rotate the central barrel of the turnbuckle to tighten or loosen the wire rope to the desired tension.
Compatibility: This turnbuckle is designed for wire ropes with a maximum diameter of 8mm. Ensure that all connecting hardware, such as thimbles, grips, and anchor points, are also rated appropriately for the load and wire rope size.
Care: Periodically inspect the turnbuckle for signs of wear or corrosion, especially if used in harsh environments. Clean with a damp cloth to remove dirt and debris. While galvanised steel offers rust resistance, prolonged exposure to highly corrosive conditions may eventually affect the coating. Avoid using abrasive cleaners or materials that could damage the galvanised finish.
