Sorrelis Praxis LED Driver - 24V - 15W
Best current price£18.50from Homebase
Best offers
Shopping.co.uk recommended and popular offers
Homebase£18.50Visit shop Sorrelis Praxis 24V Led Driver 15W
Visit shopHomebase£18.50Visit shop All Offers
3 offers from £18.50
View price history by clicking the chart icon.
Sorrelis Praxis 24V LED Driver 15W - 15 Watt Output - Plug-and-Play InstallationFree delivery in 1–3 days£18.50Visit shop →
Product Information
Full details
The Sorrelis Praxis LED driver is designed for DIY enthusiasts and homeowners looking to power multiple low-voltage lighting fixtures, such as under-cabinet lights or garden features. Its key benefit is the plug-and-play simplicity and the capacity to connect up to six different lights from a single unit. A potential consideration is its 15W maximum output, which may limit the complexity of very large installations. This driver offers a reliable 24V solution with easy connectivity, ideal for adding accent lighting or enhancing outdoor spaces.
All features
| Model Part Number | Praxis |
|---|---|
| Brand | Sorrelis |
Extended Product Information
FAQs
What is the maximum total wattage this driver can support?
The Sorrelis Praxis LED driver has a maximum output of 15 watts in total across all six ports.
Do I need a special cable for the power input?
Yes, the driver uses a C8 connector for 240V AC input. You will need a standard C7 to C8 power cord, which is typically sold separately.
Can I use this driver outdoors?
The driver itself is designed for indoor use, but it can power outdoor-rated 24V LED lighting fixtures, provided the driver is installed in a protected, dry location away from direct weather exposure.
What is the warranty period for this driver?
The Sorrelis Praxis LED driver comes with a 5-year guarantee.
Can I connect different types of 24V LED lights to the ports?
You can connect different 24V LED lights as long as their combined total wattage does not exceed 15W. It's recommended to use fixtures with similar power draws for consistent performance.
How do I connect the wires to the ports?
The ports are designed for plug-and-play connection with compatible Sorrelis lighting systems. For other connections, ensure secure wire termination according to electrical safety standards.
Troubleshooting
Driver not powering any lights
Check that the C8 power cord is securely plugged into both the driver and a functioning wall outlet. Verify that the circuit breaker for the outlet has not tripped.
Some lights are dim or not working
Ensure the total wattage of connected lights does not exceed 15W. Check individual connections to each port for loose wires or incorrect polarity. If using multiple lights of the same type, try swapping ports to isolate the issue.
Driver is warm to the touch
Slight warmth during operation is normal. If the driver is excessively hot, immediately disconnect power. Check that the connected lights' total wattage is within the 15W limit and ensure the driver is in a well-ventilated area.
Lights flicker intermittently
Verify all connections are firm and secure. A loose connection can cause intermittent power flow. Ensure the total load is not too close to the 15W limit, as fluctuations can cause flickering.
Pros and Cons
Pros
- Easy plug-and-play setup for quick installation.
- Supports multiple connections (up to 6) from a single driver.
- Provides a stable 24V output for consistent lighting.
- Suitable for both indoor (kitchen under-cabinet) and outdoor (garden) lighting.
- Comes with a 5-year guarantee for peace of mind.
Cons
- 15W total output may be insufficient for very high-power or numerous fixtures.
- Primarily designed for use with Sorrelis compatible lighting.
- Requires a separate power cord (not included) for the C8 connector.
Setup, Compatibility & Care
Setup:
- Ensure the power supply to the area is switched off.
- Connect the 240V AC power cord (sold separately) to the C8 input connector on the driver.
- Connect your 24V LED lighting fixtures to the six output ports. Ensure the polarity is correct for each connection.
- Plug the power cord into a suitable wall outlet.
- Turn on the power supply.
Compatibility:
The Praxis LED driver is designed for optimal performance with Sorrelis compatible 24V LED lighting. While it provides a standard 24V output, using it with non-Sorrelis fixtures may require verifying voltage and power requirements. The 15W limit applies to the total load across all six ports.
Care:
- Keep the driver in a dry, well-ventilated area. Avoid covering it.
- Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Periodically check connections to ensure they are secure and free of corrosion.
- Ensure the driver is not exposed to excessive heat or moisture.