Best current price£8.89from Travis Perkins
Shopping.co.uk recommended and popular offers
Travis Perkins£8.89Visit shop Wavin OsmaSoil S/S boss adaptor (ring-seal) 50mm black
Visit shop1 offer from £8.89
View price history by clicking the chart icon.
The Wavin OsmaSoil Boss Adaptor is designed for professionals installing sanitary waste removal systems, offering a secure and leak-resistant connection for 50mm plastic or copper pipes. Its key benefit is the captive seal technology ensuring a reliable joint. A potential consideration is the need for specific solvent or push-fit methods depending on the system type.
| Model Part Number | 2S402B |
|---|---|
| Brand | Wavin |
The Wavin OsmaSoil system offers both push-fit joints with captive seal technology for ease of use and solvent weld joints for a permanent, robust connection. This specific boss adaptor is designed to accommodate these joint types.
The adaptor is designed to connect to 50mm plastic pipes manufactured to specific BS EN standards (1451-1, 1455-1, 566-1) and copper pipes to BS 659 or BS 2871. While it may fit pipes from other brands, compatibility is best assured with pipes meeting these standards.
The OsmaSoil system is designed for sanitary waste removal, which typically operates at low pressure. It is not intended for high-pressure potable water systems.
The integrated captive seal technology in the ring-seal system provides a reliable, watertight connection when the pipe is fully inserted. For solvent weld, proper preparation and application of the solvent cement are crucial.
Yes, the PVC-U construction makes it suitable for both underground and above-surface applications, offering resistance to environmental factors.
The integral 2.5-degree fall on horizontal adaptors helps to ensure that waste and water flow effectively through the pipe towards the soil stack, preventing pooling and potential blockages.
Ensure the pipe is fully inserted and the captive seal is correctly seated. For solvent weld joints, verify that sufficient solvent cement was used and the joint was held correctly during the setting period. Check for damage to the seal or pipe.
Check for any obstructions or burrs inside the socket or on the pipe end. Ensure the pipe is the correct diameter (50mm) and standard. A small amount of silicone lubricant can aid insertion if needed, but avoid petroleum-based lubricants.
While PVC-U is durable, extreme UV exposure or chemical contact can cause degradation. Ensure the product is suitable for the specific environmental conditions. Replace any visibly degraded components.
Setup:
Compatibility:
Care:
