Add practical, elevated lighting to paths, borders and flowerbeds with this tall outdoor garden sp...Add practical, elevated lighting to paths, borders and flowerbeds with this tall outdoor garden spike light. Designed to sit higher than standard low-level spike lights, it stands up to 92cm above ground once installed, or can be set lower depending on how deeply the spike is placed. The slim black pole and cone-shaped head create a clean, modern look, while the downward-facing design directs light onto the area below. This makes it ideal for edging pathways, lighting planted borders, highlighting flowerbeds or adding subtle illumination along driveways and garden features. The fitting is made from durable die-cast aluminium with a tempered glass diffuser and is IP65 rated for outdoor use. It also includes a 100cm 3-core rubber outdoor cable with an IP68 connector for practical connection to 240V mains power. The fitting uses a standard GU10 bulb. Supplied with a 5.3W GU10 LED bulb producing 550 lumens in 3000K Warm White.
The Auraglow Mains Powered Tall Garden Spike Light is designed for homeowners and landscapers who want to add elevated, professional-grade illumination to pathways, garden borders, and driveways. Its key benefit is the adjustable height of up to 92cm, which allows for better light distribution across garden features compared to standard low-level options, though it does require a 240V mains power connection, making it less flexible than solar alternatives.
All features
Colour
Black
Model Part Number
9992WW
Brand
Auraglow
Extended Product Information
FAQs
Can I use an LED bulb in this light?
Yes, the fitting uses a standard GU10 bulb and is supplied with a 5.3W LED.
Is this light waterproof?
It is IP65 rated, which means it is protected against low-pressure water jets and outdoor weather conditions.
How high does it stand?
It stands up to 92cm, though you can bury the spike deeper to lower the height if desired.
Does it need a transformer?
No, this unit is designed for direct 240V mains power.
Can I replace the cable?
The product includes a 100cm 3-core cable, but it should only be modified or extended by a qualified electrician.
Is the finish resistant to rust?
The fitting is made from die-cast aluminium, which is highly resistant to corrosion in typical garden environments.
Troubleshooting
Light fails to turn on
Check the main power circuit, ensure the IP68 connection is tight, and verify the GU10 bulb is securely seated.
Moisture inside the lens
Ensure the head assembly is screwed on tightly and check that the rubber gasket seal is not pinched or damaged.
Light flickering
Verify the bulb is fully tightened in the socket; if the problem persists, replace the GU10 bulb to rule out a faulty unit.
Pros and Cons
Pros
Tall design offers better coverage than standard spike lights
Sturdy die-cast aluminium construction
Weather-resistant IP65 rating
Replaceable GU10 bulb for easy maintenance
Secure IP68 connection included
Cons
Requires professional installation for mains power wiring
Not portable due to fixed mains connection
Requires digging/installation into soft ground
Setup, Compatibility & Care
Placement: Ensure the ground is firm enough to support the stake but soft enough to insert the spike to the desired depth.
Wiring: As this is a mains-powered unit, ensure the connection is handled by a qualified individual if you are not experienced with 240V outdoor electrical systems. Use the provided IP68 connector to link to your main circuit.
Bulb Installation: To install or replace the bulb, unscrew the head housing and secure the GU10 bulb. Ensure the rubber gasket is seated correctly before closing to maintain the IP65 seal.
Care: Wipe the glass lens with a damp cloth periodically to remove dust or grime, which ensures maximum light output. Avoid using abrasive chemicals.