Shopping.co.uk

Davies Craig 90 Degree Threaded Adaptor - EWP115 / EWP150

Davies Craig 90 Degree Threaded Adaptor - EWP115 / EWP150

This 90 degree adaptor is designed to fit the female thread found in Davies Craig EWP115 and EWP15...

Best current price£49.49from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£49.49Visit shop

Davies Craig 90 Degree Threaded Adaptor For EWP150 & EWP115 Car Water Pump

Visit shop

All Offers

3 offers from £49.49 - £50.74

View price history by clicking the chart icon.

eBayDavies Craig 90 Degree Threaded Adaptor For EWP150 & EWP115 Car Water Pump
Free delivery in 1–3 days
£49.49
Visit shop
Demon TweeksDavies Craig 90 Degree Theaded Adaptor For EWP115 / EWP150
£7.94 delivery
£50.74
Visit shop

Product Information

Full details

This Davies Craig 90 Degree Threaded Adaptor is designed for users of Davies Craig Electric Water Pumps (EWP) models EWP115 and EWP150. It offers a crucial solution for redirecting coolant flow by 90 degrees, facilitating cleaner and more efficient plumbing in custom engine builds. A key benefit is its versatility, allowing for AN-16 male connections or the use of 38mm bore hose. The primary caveat is its specific compatibility with only certain EWP models and the need for correct hose size selection.

All features

Model Part NumberDCP1024
BrandDavies Craig

Extended Product Information

FAQs

What EWP models is this adaptor compatible with?

This adaptor is specifically designed for the Davies Craig EWP115 and EWP150 electric water pump models.

Can I use this with any type of hose?

You can use it with an AN-16 male fitting for Aeroquip or Goodridge hoses. Alternatively, a screw-on adaptor is supplied to accept a 38mm bore hose (ideally 38mm, but suitable for 35-40mm).

How do I ensure the adaptor stays in place?

The adaptor features a locknut that allows you to fix it in any desired position after screwing it into the pump. Tighten this locknut securely.

What is the main benefit of using this adaptor?

It allows you to redirect coolant flow by 90 degrees, which is crucial for efficient and clean plumbing in custom engine bays or tight spaces.

Does it come with the hose or hose fittings?

No, this product is the 90-degree adaptor only. You will need to supply your own AN-16 hose fittings or 38mm bore hose separately.

What is the ideal hose size for the included adaptor?

The screw-on adaptor is ideally suited for a 38mm bore hose, but it can accommodate hose sizes ranging from 35mm to 40mm.

Troubleshooting

Adaptor does not fit EWP thread

Verify that you have a Davies Craig EWP115 or EWP150. This adaptor is not compatible with other pump models or brands.

Leak at the pump connection

Ensure the adaptor is screwed in fully and that the pump's female thread is clean and undamaged. Re-tighten securely.

Hose connection leaks

For AN fittings, ensure the fitting is properly seated and tightened. For the 38mm hose adaptor, confirm the hose clamp is tight and the hose is the correct bore size (ideally 38mm).

Adaptor rotates freely after tightening locknut

Ensure the locknut is fully tightened against the adaptor body. Check for any debris preventing a secure lock.

Pros and Cons

Pros

  • Provides a clean 90-degree coolant flow redirection.
  • Offers dual connection options (AN-16 or 38mm hose).
  • Locknut ensures the adaptor stays in the desired position.
  • Specifically engineered for Davies Craig EWP115 and EWP150 models.
  • High-quality materials for durability.

Cons

  • Limited compatibility; only fits specific Davies Craig EWP models.
  • Requires careful selection of the correct hose size (ideally 38mm).
  • AN fitting requires a specific type of hose and coupling.
  • May require additional components for non-AN hose connections.

Setup, Compatibility & Care

Setup:

  1. Ensure your Davies Craig EWP is an EWP115 or EWP150 model.
  2. Clean the female thread on the water pump outlet.
  3. Screw the adaptor's female thread into the pump outlet until snug.
  4. Use the integrated locknut to rotate the adaptor to the desired 90-degree position and tighten the locknut to secure it.
  5. Connect your chosen hose: either attach an AN-16 hose fitting to the male AN-16 outlet, or use the supplied adaptor for a 38mm bore hose (suitable for 35-40mm hose). Ensure the hose clamp is tightened securely.

Compatibility:

  • Water Pumps: Davies Craig EWP115 and EWP150 only.
  • Hose Sizes: Primarily designed for AN-16 fittings or 38mm (1.5 inch) bore hose. Can accommodate 35mm to 40mm hose with the included adaptor.

Care:

  • Periodically check the security of the locknut and hose connections.
  • Clean any external debris with a damp cloth. Avoid harsh chemicals.

Price History

DatePrice
Visit shop