Prym Curtain Pleating Tape - Transparent

This tape is designed for a 1:3 pleat ratio, meaning for every 3 inches of fabric, you create 1 inch of pleat.

Measure the width of the curtain heading where you intend to apply the tape. Cut the tape to match this measurement.

Once the adhesive has been activated and bonded to the fabric, the tape is not designed for reuse.

It is suitable for most standard curtain types. For very heavy drapery or delicate silks, testing adhesion and ensuring the fabric can support the pleats is recommended.

Set your iron to a temperature appropriate for your fabric. Place a pressing cloth between the iron and the tape, and press for 3-5 seconds. Avoid prolonged direct contact with the tape itself.

The tape is transparent and designed to be nearly invisible on most fabrics. However, on extremely sheer or very dark fabrics, it might be slightly perceptible up close.

Ensure the fabric is clean and dry before application. Use a warm iron over the tape for a few seconds to activate the adhesive more effectively. Test on a fabric scrap first.

Carefully align the fabric with the guide markings on the tape. Ensure consistent folding before applying pressure or ironing.

While designed to be transparent, on very fine or sheer fabrics, the tape might be slightly perceptible. Consider using a very thin, closely matched fabric or an alternative method for extremely sheer materials.