XL Joinery Internal Oak Pre-Finished Suffolk - 2040 X 926 X 40mm

No, the door is supplied as a door leaf only. You will need to purchase hinges, handles, and latches separately.

Because it is a pre-finished high-quality oak door, it is designed to showcase the natural wood grain. Painting is generally not recommended as it will cover the factory finish.

Yes, its solid core construction makes it durable, but ensure it is not subjected to direct, constant water spray and that the room is well-ventilated.

You can typically trim up to 5-10mm from each edge, but always check the specific product data sheet to avoid compromising the structural integrity of the door.

The solid core construction provides significantly better noise reduction than hollow-core doors, making it an excellent choice for bedrooms and home offices.

An engineered core uses layers of timber to create a stable board that is far less likely to warp or twist than a single piece of solid wood.

Check the hinge screws for tightness and ensure the door is properly plumb. Trim minor amounts from the binding edge if necessary, then reseal the exposed timber.

Verify that three hinges are installed. If sagging persists, check that the hinge screws are fully tightened and the wood frame is not splitting.

Clean with a soft, damp cloth followed by a dry cloth. Do not apply wax or polish to the factory-finished surface.