Warren Reed - Designer Jungle Green Kitchen Splashback - 900mm x 650mm


Currently unavailable


Currently unavailable
This Warren Reed Designer splashback is for homeowners looking to add a touch of durable style to their kitchen. Its key benefit is providing a hygienic, easy-to-clean, and visually striking focal point. A potential caveat is the need for a specific, natural-curing adhesive for installation. It features high-resolution printing on 6mm toughened glass, offering scratch resistance and heat protection, making it ideal for busy kitchens.
| Model Part Number | 65 x 90cm |
|---|---|
| Brand | Warren Reed - Designer |
You must use a clear, natural-curing adhesive specifically designed for glass splashbacks. Always follow the adhesive manufacturer's instructions for application and curing times.
No, this toughened glass splashback cannot be cut to size after manufacturing. Please ensure you select the correct size for your kitchen space.
Wipe clean with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Dry with a lint-free cloth. Avoid abrasive materials.
Yes, the splashback is made from 6mm toughened glass and can withstand temperatures up to 400°C, making it suitable for use behind cooking hobs.
This model is 900mm wide by 650mm high and 0.6cm (6mm) thick.
Yes, this splashback comes with a 1-year guarantee against manufacturing defects.
While it can be adhered over a perfectly flat tile surface, it is best installed on a smooth, level wall for optimal adhesion and appearance. Any grout lines may show through.
Ensure the wall surface is clean, dry, and free from dust or grease. Use only the recommended clear, natural-curing adhesive and apply it evenly. Ensure firm pressure is applied during installation.
Use a mild, non-abrasive kitchen cleaner or a dedicated glass cleaner. Wipe with a soft, lint-free cloth and dry thoroughly to prevent streaks. Avoid excess cleaning solution.
Inspect the splashback for any signs of damage before installation. If damage is found, do not install and contact customer support. During use, avoid direct, forceful impacts.
Setup: Installation requires a clear, natural-curing adhesive. Apply the adhesive evenly to the back of the splashback or the wall according to the adhesive manufacturer's instructions. Carefully position the splashback and press firmly to ensure good contact. Avoid any drilling as the product is designed for adhesive mounting. Ensure the wall surface is clean, dry, and flat before application.
Compatibility: This splashback is designed for use on standard kitchen walls behind hobs and worktops. It is compatible with electric and gas hobs, provided there is adequate ventilation as per your hob manufacturer's guidelines. Ensure the dimensions of the splashback are appropriate for your intended space.
Care: Clean regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid using harsh chemicals, abrasive pads, or scouring powders, which can scratch the glass surface. For stubborn marks, a gentle cleaner specifically designed for glass can be used.