D-C-Fix Worktop Wrap - 67.5cm X 3M

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£19.97from B&Q

One Offer

1 offer from £19.97

View price history by clicking the chart icon.

B&QB&Q - Marble Pink 67.5Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£19.97
Visit shop

Product Information

Full details

This D-C-Fix self-adhesive vinyl wrap is designed for homeowners looking to update kitchen worktops and furniture on a budget. Its key benefit is providing a fresh, new look without the cost and hassle of replacement, and it's fully removable, making it ideal for renters. However, it requires careful application to avoid bubbles and creases, and is not suitable for direct contact with hot pans.

All features

Model Part Number67.5cm X 3M
Brandd-c-fix

Extended Product Information

FAQs

Can this wrap be applied over existing laminate or tiles?

Yes, as long as the existing surface is smooth, clean, dry, and non-porous. Any grout lines on tiles should be filled for a smooth finish.

How do I remove the vinyl wrap when I want a change?

Gently heat the vinyl with a hairdryer on a low setting. This will soften the adhesive, allowing you to carefully peel the film back.

Is the material safe for food preparation surfaces?

The material is phthalate-free and durable, but for direct food preparation, it is recommended to use a cutting board. Always wipe up spills promptly.

What tools are needed for application?

You will need a utility knife or craft blade for trimming, a felt edge smoother or squeegee for applying, and a measuring tape. A hairdryer is helpful for curves and removal.

What is the heat resistance of the wrap?

The vinyl wrap is heat resistant up to 70°C. It is not suitable for direct contact with hot pans; use trivets or pan rests.

Can I reposition the vinyl if I make a mistake during application?

Yes, the water-based adhesive allows the film to be lifted and reapplied if you make a mistake during the initial application. Simply peel back and start again.

Is this a factory-sealed retail roll?

No, this item is professionally cut from a larger d-c-fix master roll and repackaged to provide custom lengths. It is not a factory-sealed retail roll.

Troubleshooting

Air bubbles or creases appear during application.

Gently lift the vinyl film back to the point of the bubble/crease and reapply, smoothing it out with a felt edge smoother. For stubborn bubbles, a small pin prick may release the air.

The vinyl is not sticking properly.

Ensure the surface is perfectly clean and dry. Reapply gentle heat with a hairdryer on a low setting to activate the adhesive, then press firmly.

Difficulty applying around curved edges.

Use a hairdryer on a low setting to gently warm and stretch the vinyl, making it more flexible. Apply pressure with a felt smoother as you go.

Water seeping under the edges near a sink or hob.

Ensure the edges are properly sealed with a good quality silicone sealant. If seepage has occurred, carefully lift the affected edge, dry thoroughly, and reapply sealant.

Pros and Cons

Pros

  • Cost-effective alternative to replacing surfaces.
  • Easy to apply and reposition if mistakes are made.
  • Fully removable, suitable for renters.
  • Durable and easy to clean surface.
  • Offers a wide range of realistic design options.

Cons

  • Requires careful application to avoid air bubbles and creases.
  • Not suitable for direct contact with hot pans; worktop savers are recommended.
  • Needs proper sealing around sinks and hobs to prevent water damage.
  • May require a hairdryer for smooth application on curves and for removal.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth. Remove any grease or dust.
  2. Measure your surface and cut the vinyl wrap to size using the grid on the reverse for guidance. Allow for a slight overlap.
  3. Peel back a small section of the backing paper.
  4. Carefully align the wrap with the edge of the surface and begin to apply, smoothing out air bubbles as you go with a felt edge smoother.
  5. For curved edges, gently heat the vinyl with a hairdryer on a low setting to make it more pliable, then smooth it into place.
  6. Trim any excess material with a sharp utility cutter.
  7. If applying near water sources like sinks or hobs, use a silicone sealant around the edges to prevent water from getting underneath.

Compatibility:

  • Suitable for any flat, smooth, non-porous surface.
  • Ideal for kitchen worktops, tabletops, furniture, doors, and cabinets.

Care:

  • Wipe clean with a damp cloth. Mild soap can be used if necessary.
  • Wipe up spills immediately to prevent staining.
  • Avoid using abrasive cleaners or scouring pads.
  • Use worktop savers for hot pans and cutting boards for food preparation.
  • Heat resistance is up to 70°C.

Price History

DatePrice
Visit shop