Best current price£12.35from PVC Cladding UK
Shopping.co.uk recommended and popular offers
PVC Cladding UK£12.35Visit shop Molan Brown Exitex Pvc F Section Rafter Supported - 25Mm X 3Mtr
Visit shop2 offers from £12.35 - £14.45
View price history by clicking the chart icon.
The PolyX PVC F Section is designed for professional installers and DIY enthusiasts working on roofing projects with 25mm polycarbonate sheets. It provides a secure, weather-resistant finish to the side edges of rafter-supported roofing systems, ensuring that polycarbonate panels stay protected and aesthetically uniform. While it offers excellent durability and a clean look, users should ensure their rafter system is compatible with 25mm thickness requirements before installation.
| Model Part Number | PVCF253-B |
|---|---|
| Brand | Storm |
No, this specific profile is engineered exclusively for 25mm thick polycarbonate roofing sheets.
A fine-toothed hacksaw or a standard PVC mitre saw works best for a clean, professional cut.
Yes, the PVC material is designed for exterior use and includes properties to resist UV degradation.
While technically possible with specialized PVC paints, it is not recommended as it may void the product's finish integrity and lead to peeling.
The F Section is typically a friction-fit component, but you may use stainless steel screws to secure it further if your installation requirements dictate.
Check that the polycarbonate sheet is fully pressed into the glazing bar and that the trim is pushed down until it clicks securely over the edge.
Ensure there is no grit or debris inside the F section channel and check that the polycarbonate sheet edge is clean and free of burrs.
To install, ensure your 25mm polycarbonate sheets are fully seated within the rafter-supported glazing bars. Measure the length required for your rafter span and cut the F Section using a fine-tooth saw or PVC cutter to prevent splintering. Press the profile firmly onto the edge of the sheet until it locks into place.
For cleaning, use mild soapy water and a soft cloth to maintain the brown finish. Avoid abrasive scouring pads or harsh chemical solvents, as these can scratch the surface or cause the PVC finish to fade prematurely.
