Best current price£7.87from eBay
Shopping.co.uk recommended and popular offers
eBay£7.87Visit shop Tamiya 1/35 Challenger 2 Photo-Etched Part - 35277
Visit shop7 offers from £7.87 - £54.97
View price history by clicking the chart icon.
This photo-etched parts set is designed for experienced modelers looking to enhance the detail of their 1:35 scale Tamiya Challenger 2 military model kit. It provides a key benefit of achieving a highly realistic reproduction of the engine grille's protective netting and a name plate, significantly elevating the model's authenticity. A potential caveat is that photo-etched parts require precision handling and specialized tools, making it best suited for those with prior modeling experience.
| Model Part Number | 35277 |
|---|---|
| Brand | Tamiya |
The main purpose is to provide highly detailed, scale-accurate components, specifically the protective netting for the rear engine grille and a name plate, to enhance the realism of the 1:35 Tamiya Challenger 2 model kit.
Yes, specialized tools such as fine-tip tweezers, a sharp hobby knife or photo-etch scissors, a cutting mat, and a suitable adhesive (like liquid cyanoacrylate) are highly recommended for safe and effective use.
This set is generally recommended for intermediate to advanced modelers due to the delicate nature and precise handling required for photo-etched parts.
This product is designed for the 1:35 scale Tamiya Challenger 2 military model kit.
These parts are specifically designed for the Tamiya 1:35 Challenger 2 kit and may not fit or be compatible with models from other manufacturers or different scales.
Photo-etched parts are typically attached using liquid cyanoacrylate (super glue) or specialized photo-etch adhesives. Ensure the surfaces are clean before applying a small amount of adhesive and holding the part in place until cured.
Tamiya has a strong reputation for producing highly detailed, accurate, and quality model kits, often considered a benchmark in the hobby industry.
Attempt to gently straighten the part using fine-tip tweezers or needle-nose pliers. Work slowly and carefully to avoid further damage. For significant damage, consider if the damaged area will be visible on the final model or if a replacement part is needed.
Ensure surfaces are clean and free of dust or old adhesive. Use a small amount of fresh liquid cyanoacrylate glue. Apply slight pressure for a few seconds while the glue cures. For stubborn parts, consider using a photo-etch specific adhesive or a small drop of accelerator.
Use a very sharp hobby knife and a cutting mat, or dedicated photo-etch shears. Make multiple light passes rather than one heavy cut to achieve a clean separation without bending the part.
Double-check the part number and its intended location against the instructions. Ensure no excess material or mold lines from the base kit are interfering with the fit. Minor adjustments may be possible by careful filing or sanding, but proceed with caution.
Setup: This set requires careful cutting of photo-etched parts from their frets using a sharp hobby knife or specialized photo-etch scissors. Parts are typically attached using liquid cyanoacrylate (super glue) or specific photo-etch adhesives. Precision placement is crucial. Tools like fine-tip tweezers, a magnifying glass, and an appropriate cutting mat are recommended.
Compatibility: This set is specifically designed for the 1:35 scale Tamiya Challenger 2 model kit. It may not be compatible with other brands or scales of Challenger 2 models.
Care: Handle the photo-etched parts with extreme care as they are very thin and can bend or break easily. Once attached to the model, they become more robust but should still be treated gently. Avoid harsh cleaning agents; a soft brush or compressed air can be used for dusting.
