Hozelock Twist 3in1 Spray Nozzle - HZL049

Best current price£14.75from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.75Visit shop B&Q - Hozelock Twist 3In1 Spray Nozzle Garden Yard Hose Pipe Water Gun & Fittings
Visit shop
Best current price£14.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.75Visit shop B&Q - Hozelock Twist 3In1 Spray Nozzle Garden Yard Hose Pipe Water Gun & Fittings
Visit shop2 offers from £14.75 - £22.15
View price history by clicking the chart icon.
The Hozelock Twist 3in1 Spray Nozzle (HZL049) is designed for gardeners seeking a versatile and durable watering tool. Its key benefit is the ability to switch between three spray patterns for various gardening tasks, with a convenient water-stop feature to prevent waste. A potential caveat is its compatibility, which is limited to specific hose sizes and the Hozelock quick connect system.
| Model Part Number | HZL049 |
|---|---|
| Brand | Hozelock |
Simply twist the front rotating collar of the nozzle. Turn it until the desired spray pattern (Wide Cone, Powerful Jet, or Fine Rose) clicks into place.
This nozzle is designed for use with 12.5mm and 15mm diameter garden hoses.
The nozzle uses the Hozelock quick connect system. It is designed to work seamlessly with Hozelock hoses and accessories. While it might fit other connectors, full compatibility is guaranteed with the Hozelock system.
The water stop connector automatically stops the water flow the moment you disconnect the spray nozzle from the hose, preventing water wastage and keeping you and your surroundings dry.
You can clean the nozzle by rinsing it under running water. If the spray holes are blocked, use a soft brush or a pin to gently clear any debris. Avoid using abrasive materials that could scratch the plastic.
The 'Powerful Jet' setting is strong for general garden use and cleaning, but it is not designed for high-pressure washing applications like those requiring a dedicated pressure washer.
The nozzle is constructed from high-quality, strong, shatterproof, and frost-resistant ABS plastic.
Check that the nozzle is securely connected to the hose and the tap is turned on. Ensure the selected spray pattern is not set to 'off' if such a setting exists beyond the three patterns.
Verify the female connector is properly seated on the hose end. Ensure the hose clamp (if applicable) is tight or the quick-connect fitting is fully engaged. Inspect the connector for any damage.
Confirm sufficient water pressure from the tap. Check the nozzle head for any blockages in the spray holes; clean gently with a soft brush or pin if necessary. Ensure the hose is not kinked.
The water stop connector should automatically cut off flow. If dripping persists, there might be an internal seal issue. Ensure the nozzle is fully disconnected from the hose to stop water flow and consider replacement if the issue is constant.
Setup:
Compatibility:
Care: