Shernbao Trimmer Replacement Blade - Ceramic Edge Blade

No, this ceramic edge blade is designed to be wear-resistant and cannot be resharpened. It must be replaced when it loses its sharpness.

This replacement blade is specifically designed for the Shernbao Cordless Trimmer, model PGT-310.

The blade provides a cutting length of 0.5-0.8mm.

The replacement frequency depends on usage. However, replace the blade when you notice a decrease in cutting performance or it begins to pull hair.

No, ceramic blades do not require lubrication. Lubrication can attract debris and is unnecessary for their operation.

Use a small brush to remove hair and debris. A dry cloth can be used for surface cleaning. Avoid using water or solvents.

Ceramic can be brittle. If the blade breaks, carefully remove the pieces and replace the blade with a new one. Avoid using a damaged blade.

Ensure the blade is correctly and securely attached to the trimmer. Check for any visible debris or hair stuck between the blade and the trimmer head and clean thoroughly. If the blade is dull, it needs to be replaced as it cannot be sharpened.

Verify the blade is properly seated and has not become bent or damaged. Ensure the hair being cut is clean and free of tangles or mats. If the issue persists, the blade may be worn and requires replacement.

Check for obstructions or hair caught in the blade mechanism. Ensure the blade is securely attached. If the noise continues, the blade may be damaged or misaligned and should be replaced.